Bedienungsanleitung Panasonic SCCMAX5E (Seite 11 von 64) (Englisch, Polnisch)

608348

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

RQT0A52

ENGLISH

Sound and illumination

effects

The following sound effects can be added to the

audio output.

1 Press [SOUND] repeatedly to select the sound

effect.

2 Press [3, 4] to select the setting and then

press [OK].



≥ You may experience a reduction in sound quality when these

effects are used with some sources. If this occurs, turn the

sound effects off.

By the unit only

You can change the illumination colour on the unit.

Turn [ILLUMINATION/CONTROL].

To cancel, select “OFF”.

Recording ([USB], [AUX])

You can record:

≥ MP3 tracks via [USB\A] to [USB\B].

≥ audio via AUX IN 1 or AUX IN 2 to [USB\B].

Preparation

≥ Connect a USB device to [USB\B] for storing

recordings.

≥ Prepare the source you want to record.

– Connect a USB device to [USB\A] or connect the external

equipment.

1 Select the source you want to record.

(“USB A”, “AUX 1” or “AUX 2”).

2 Press [USB REC ¥/;] on the unit to start

recording.

≥ [AUX] Start playback on the external equipment.

e.g.: Recording from

[USB\A]

[USB]

≥ If you stop recording before the end of a track, the affected

track will not be stored. Only fully recorded tracks will be

stored.

(“NO FILE RECORDED” is indicated if no track is recorded.)

≥ You can record in selected playback modes (except random

and repeat modes). (l 10)

[AUX]

≥ A track mark is added every time recording is paused. You

can also add track marks in other ways. (l 12)

∫ To check storage capacity

In the stop mode, press [DISPLAY] once.

The available storage space or the remaining

recording time of the USB device in [USB\B] will be

indicated.

≥ “UPDATE” is indicated when the unit is reading the device.

≥ If there is no USB device in [USB\B], “NODEVICE” is

indicated for a few seconds.

Sound effects

PRESET EQ

Select the desired preset EQ

setting.

≥ Select “FLAT” to turn preset EQ off.

Using the unit

Press [ PRESET EQ].

BASS

j4 to i4

MID

TREBLE

INPUT

LEVEL

(For “AUX 2”

source)

“NORMAL” or “HIGH”

≥ Select “NORMAL” if the sound is distorted

during “HIGH” input level.

SUPER

WOOFER

“SW1”, “SW2”, “SW3” or “OFF”

Using the unit

1 Press and hold

[D.BASS, -SUPER WOOFER]

to show the current setting.

2Press [:/6] or [5/9]

to adjust the setting.

D.BASS

“D.BASS BEAT”, “D.BASS OFF” or

“D.BASS ON”

Using the unit

Press [D.BASS, -SUPER WOOFER].

≥ D.BASS BEAT: This function emphasises

the attack level of the drum beat and

produces a punchy sound. Depending on

the track, the effect may be small.

Illumination settings

Stop

recording

Press [∫].

≥ “WRITING” is indicated.

Pause

recording

([AUX])

Press [USB REC ¥/;] on the unit

during recording. (

“ ” blinks.)

Press again to continue recording.

You cannot do this in “SYNCHRO” mode.

(l 12)

Album being recorded

Percentage of the

recording process

SC-CMAX5_E~RQT0A52-R.book 11 ページ２０１５年６月１２日　金曜日　午前１１時２２分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCCMAX5E Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCCMAX5E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info