Bedienungsanleitung Panasonic SCDT110EB (Seite 34 von 36) (Englisch)

612798

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

RQT7035

Reference

Troubleshooting guide

Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do

not solve the problem, consult your dealer for instructions.

Power Page

Operation

No power. ≥Insert the AC mains lead securely into the household mains socket. 9

The unit is automatically

switched to the standby mode.

≥The unit was switched to standby by the sleep timer. 28

No response when buttons

pressed.

≥Some operations may be prohibited by the disc.

≥The unit may not be operating properly due to lightning, static electricity or some other external

factor.

Reset procedure:

Press [Í] to switch the unit to the standby mode and then back to ON.

Alternatively, press [Í] to switch the unit to the standby mode, disconnect the AC mains lead,

and then reconnect it.

—

No operations can be performed

with the remote control.

≥Check the batteries are installed correctly.

≥The batteries are depleted: Replace them with new ones.

≥Point the remote control at the remote control sensor and operate.

—

Cannot switch on the television

with the remote control.

≥Press [SHIFT]i[TV] first to operate the television. —

Play doesn’t start (or stops

immediately) when you press

[1] (play).

≥Condensation has formed: Wait 1 to 2 hours for it to evaporate.

≥This unit cannot play discs other than the ones listed in these operating instructions.

≥This unit cannot play DVD-Video with a region number other than “2”, “ALL” or multiple region

numbers including “2”.

≥The disc may be dirty and may require cleaning.

≥Ensure that the disc is installed with the label of the side to be played facing upwards.

≥Check that the DVD-RAM has something recorded on it.

—

Cover

—

Cannot select alternative

language. No menu play.

≥This function is dependent on software availability.

≥Try selecting from the disc’s menu if one is available.

—

No subtitles. ≥This function is dependent on software availability.

≥Subtitles are cleared from the television. Display the subtitles.

—

The position of the subtitles is

incorrect.

≥Change the position of the subtitles with “Subtitle Position” in the GUI screen. 24

Soundtrack and/or subtitle

language is not the one selected

with the SETUP menus.

≥This function is dependent on software availability. —

Cannot change the angle. ≥This function is dependent on software availability. Even if a disc has a number of angles

recorded, these angles may be recorded for specific scenes only.

—

The SETUP menu cannot be

accessed.

≥Select “DVD” as the source.

≥Cancel all group, program and random play.

—

Cannot add markers. ≥You cannot add markers while playing a play list or if the disc’s play time doesn’t appear on the

unit’s display.

—

There are already markers.

[RAM]

≥The unit reads and displays the markers added with a DVD video recorder. You can clear them

but reappear when you switch the unit to standby, change the source, or open the disc tray.

—

Marker numbers I added are

different when I call them up.

[RAM]

≥The unit numbers markers by time so they change when you add and delete them. —

Cannot select random or

program play.

≥You cannot select random or program play with some DVD-Video. —

Folders deeper than the eighth

layer on a data CD are not

displayed correctly.

≥Folders deeper than the eighth layer are displayed as the eighth layer. —

You have forgotten your ratings

password.

Reset all the SETUP settings to

Factory Preset.

≥While stopped and “DVD” is the source, press and hold [∫] on the unit and [S10/-/--] on the

remote control for about 3 seconds until “Initialized” disappears from the television. Turn the unit

off and on again.

All settings will return to the default values.

—

The unit doesn’t play the data

type (WMA/MP3 or JPEG)

selected in “Mixed Disc—Audio

& Stills” in the SETUP menu.

≥Reload the disc for the setting to be effective. Press [<] to open the tray, then press [1] (play)

to start play.

—

Cannot eject disc. ≥The unit may not operate properly if the disc is damaged or dirty.

Press [Í] and after the display disappears, wait a few seconds, then press [Í] again and eject

the disc.

—

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCDT110EB Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info