Bedienungsanleitung Panasonic SCHC35DBEB (Seite 15 von 24) (Englisch)

612832

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

RQTX1262

With this function it is possible to check the signal reception

quality of a selected frequency.

If the reception quality is poor, try adjusting the antenna.

Preparation

≥ Press [EXT-IN, RADIO] repeatedly to select “DAB”.

1 Press [RADIO MENU] repeatedly to select

“SIGNAL QUALITY”.

2 Press [2, 1] to select the frequency.

≥ After displaying the frequency, the current reception quality

is displayed.

3 To continue checking the quality of other frequencies

Press [2, 1] again and select the desired

frequency.

To exit

Press [RADIO MENU].

≥ If the antenna has been adjusted, perform Auto scanning and

update the station memory. (> below)

When new stations are added or when the antenna has been

moved, reperform the Auto scan.

1 Press [RADIO MENU] repeatedly to select

“AUTOSCAN” and then press [OK].

2 While “START ?” is flashing,

Press [OK].



≥ When updating the memory with Auto scan, preset stations will be

erased. Preset them again (> right).

≥ When a frequency is tuned using Auto scanning, the ensemble

corresponding to the frequency is displayed for approximately 2

seconds.

≥ Total stations received is displayed for approximately 2 seconds.

On this unit, there are 2 ways of selecting the desired station.

Preparation

≥ Press [EXT-IN, RADIO] repeatedly to select “DAB”.

≥ Make sure that the initial settings are made.

(> 14)

To select by station (alphanumeric order)

Press [6] or [5] to select a station.

To select by preset

Press [:] or [9] to select a preset station.

≥ Alternatively, press the numeric buttons to select the channel.



≥ To select by preset, make sure that stations have already been

preset manually. (> below)

You can preset up to 20 DAB channels.

Preparation

≥ Press [EXT-IN, RADIO] repeatedly to select “DAB”.

1 Press [6] or [5] to select the station.

2 Press [PROGRAM].

3 Press the numeric buttons to select the

channel.



≥ You cannot preset stations when the station is not broadcasting or

when the secondary service is selected.

≥ The station occupying a channel is erased if another station is

preset in that channel.

If the station is providing secondary service, “ ” will be

displayed. It is possible to change between the primary and

secondary service.

Preparation

≥ While listening to the primary service.

1 Press [RADIO MENU] repeatedly to select

“SECONDARY” and then press [OK].

2 Press [2, 1] to select the secondary service

and press [OK].



≥ The setting will go back to primary service when changes are made

(e.g. frequency is changed).

Checking the DAB signal

reception quality

To re-Auto scan DAB stations

Frequency

block Frequency

Listening to DAB stations

Presetting stations manually

Listening to the secondary

service

SC-HC55_35-RQTX1262.book 15 ページ２０１１年４月１日　金曜日　午前１１時３４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHC35DBEB Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info