Bedienungsanleitung Panasonic SCHC35EP (Seite 11 von 92) (Englisch, Polnisch)

612834

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

RQTX1265

ENGLISH

Radio operations

1 Press [EXT-IN, RADIO] repeatedly to select

“FM” or “AM”.

2 Press [6] or [5] to select the frequency of

the required station.

≥ “ST” is displayed when a stereo FM broadcast is being

received.

≥ To tune automatically, press and hold [6] or [5] until

the frequency starts changing rapidly.

jTo cancel auto tuning, press [6] or [5] once again.

jAuto tuning may not function when there is excessive

interference.

∫ To improve FM sound quality

1 Press [RADIO MENU] to select “FM MODE” while receiving

FM broadcasts.

2 Press [2, 1] to select “MONO” and then press [OK].

≥ Select “STEREO” in Step 2 to return to stereo broadcasts.

≥ “MONO” is canceled if the frequency is changed.

∫ To improve AM sound quality

1 Press [RADIO MENU] to select “B.PROOF” while receiving

AM broadcasts.

2 Press [2, 1] to select the beat proof setting (“BP 1” or

“BP 2”) and press [OK].

≥ This setting is reset to “BP 1” when changes are made (e.g. frequency is

changed).

You can preset up to 30 FM channels and 15 AM channels.

Preparation

Press [EXT-IN, RADIO] repeatedly to select “FM” or “AM”.

∫ Automatic presetting

1 Press [OK] to switch between the “LOWEST” and

“CURRENT” frequency.

2 Press [AUTO PRESET].

“PGM” starts to flash and the tuner starts to preset all the stations

it can receive into the channels in ascending order.

∫ Manual presetting

1 Press [6] or [5] to tune to the required station.

2 Press [PROGRAM].

While “PGM” is flashing, press the numeric buttons to select a channel.

≥

The station occupying a channel is erased if another station is preset in that channel.

≥ To preset more stations, repeat steps 1 - 3.

∫ Selecting a preset station

Press [:] or [9] to select the channel.

≥ Alternatively, press the numeric buttons to select the channel.

This unit is factory-set to AM 9 kHz, but you can change it to

receive broadcasts allocated in AM 10 kHz steps.

To change the step

1 Press [EXT-IN, RADIO] to select “AM”.

2 Press and hold [RADIO/EXT-IN] on the main unit.

After a few seconds the display changes to display current

minimum frequency.

3 Continue to hold down [RADIO/EXT-IN] on the main unit.

When the minimum frequency changes, release the button.

≥ To return to the original step, repeat steps 1 - 3.

≥ After the setting is changed, any previously preset frequency will be cleared.

The unit can display the text data transmitted by the radio data

system (RDS) available in some areas.

When “FM” is selected

Press [DISPLAY] to display the text data.

Each time you press the button:

PS: Program service

PTY: Program type

(Frequency display)



≥ RDS displays may not be available if reception is poor.

∫ Notes on CD-R/CD-RW

≥ This unit can play CD-R and CD-RW recorded with CD-DA or MP3.

≥ Use an audio recording disc for CD-DA and finalize* it when you finish

recording.

* A process performed after recording that enables CD-R or CD-RW

players to play audio CD-R and CD-RW.

≥ The unit may not be able to play some discs due to the condition of the

recording.

≥ Do not use irregularly shaped CDs.

≥ Do not attach extra labels and stickers.

≥ Do not use CDs with labels and stickers that are coming off or with

excessive adhesive under the labels and stickers.

≥ Do not attach scratch-proof covers or any other kind of accessories.

≥ Do not write anything on the CDs.

≥ Do not clean CDs with liquids (Wipe with a soft and dried cloth).

Creating MP3 files playable on this unit

≥ Maximum number of tracks and albums: 999 tracks and 254 albums

(Excluding Root folder).

≥ Compatible compression rate: Between 64 kbps and 320 kbps (stereo).

128 kbps (stereo) is recommended.

≥ Disc formats: ISO9660 level 1 and level 2 (except for extended formats).

≥ The time for reading TOC depends on the number of the tracks, folders

or folder structures.

Limitations on MP3

≥ This unit is compatible with multi-sessions and it takes more time to start

playing.

≥ This unit cannot play files recorded using packet write.

≥ If the disc includes both MP3 and normal audio data (CD-DA), the unit

plays the type recorded in the inner part of the disc. If the disc includes

both MP3 and other types of audio data (e.g. WMA or WAV), the unit

plays only the MP3.

≥ Depending on how you create the MP3 files, they may not play in the

order you numbered them or may not play at all.

Manual tuning

Memory preset

AM frequency step

RDS broadcasting

SC-HC55_35-RQTX1265.book 11 ページ２０１１年３月２７日　日曜日　午後７時３２分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHC35EP Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCHC35EP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info