Bedienungsanleitung Panasonic SCHC38GS (Seite 10 von 24) (Englisch)

612843

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

RQT9743

Press [DISPLAY] to change the display.

The information will scroll through the display.

Each time you press the button:

If the DAB broadcast includes time information, this

unit’s clock will be automatically updated.

1 Press [PLAY MENU] repeatedly to select “AUTO

CLOCK ADJ”.

2 Press [3, 4] to select “ON ADJUST” and then

press [OK].



≥ Select “OFF ADJUST” to turn the automatic clock adjustment

function off.

To check the signal reception quality, at least 1

frequency block needs to be successfully memorised.

≥ If “SCAN FAILED” is displayed after “DAB/DAB+” is

selected or after an auto scan, proceed to “Manually

tuning 1 frequency block” (l below)

≥ If stations have already been memorised to this unit,

proceed to “Checking the DAB/DAB+ signal

reception quality” (l right)

∫ Manually tuning 1 frequency block

Use this function to scan 1 frequency block after

adjusting the position of the DAB antenna.

Preparation

Note down a frequency block that can be received in

your region (e.g., 12B 225.648 MHz).

1 While “SCAN FAILED” is displayed.

Adjust the position of the DAB antenna.

2 Press [PLAY MENU] repeatedly to select

“MANUAL SCAN”.

3 Press [3, 4] to select the frequency block that is

receivable in your region and then press [OK].



≥ If broadcasting stations are memorised, proceed to

“To re-scan DAB/DAB+ stations” to memorise stations on

other frequency blocks. (l 9)

≥ If “SCAN FAILED” is still displayed, repeat steps 1 to 3 until a

station is memorised. If the situation does not improve, try

using an outdoor DAB antenna or consult your dealer.

∫ Checking the DAB/DAB+ signal

reception quality

1 While listening to the DAB broadcast:

Press [PLAY MENU] repeatedly to select “SIGNAL

QUALITY” and then press [OK].

≥ The current frequency block is displayed and

then the reception quality is indicated.

2 If the signal reception quality is poor, move the

antenna to a position where the reception quality

improves.

3 To continue checking the quality of other frequency

blocks:

Press [3, 4] again and select the desired

frequency.

4 Press [OK] to exit.



≥ If the antenna has been adjusted, perform auto scanning and

update the station memory. (l 9)

Only the frequencies currently used in your region as

of January 2013 on BAND III are Auto scanned

(“LOCAL”, factory setting).

Select “ALL BAND III” when you want to store stations

on other frequencies to memory.

1 Press [PLAY MENU] repeatedly to select

“SCANMODE”.

2 Press [3, 4] to select “ALL BAND III” or “LOCAL”

and then press [OK].

≥ The “DAB AUTO SCAN” begins automatically.



≥ The DAB preset channels are erased when the

“SCANMODE” is changed.

≥ If the play timer has been set and DAB/DAB+ is the music

source, the timer switches off. (l 12)

Display

Dynamic label: Information about the

broadcast

PTY display: Programme type

Ensemble label: The name of the ensemble

Frequency display: The frequency block and

frequency is displayed.

Time display: Current time

Automatic clock adjustment

To verify or improve the signal

reception quality

Changing the Auto scan frequency

range

Reception quality

0 (poor) – 8 (excellent)

SC-HC38_DBEB_DBGN_GS~RQT9743-B.book 10 ページ２０１３年５月２８日　火曜日　午後５時１分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHC38GS Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info