Bedienungsanleitung Panasonic SCHC39EC (Seite 13 von 76) (Englisch, Spanisch, Polnisch)

612846

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

RQT9944

ENGLISH

Troubleshooting

Before requesting service, make the following checks. If

you are uncertain about some of the check points, or if the

solutions indicated in the following guide does not resolve

the issue, then consult your dealer for instructions.

Humming heard during playback.

≥ If an AC mains lead or fluorescent lights are near the cords, then

keep other appliances and cords away from the cables.

The unit does not work.

≥ One of the unit’s safety devices may have been activated.

Reset the unit as follows:

1 Press [Í/I] on the unit to switch the unit to standby.

≥ If the unit does not switch to standby, press [Í/I] on the unit

for approximately 10 seconds. The unit is forcibly switched

to standby. Alternatively, disconnect the AC mains lead, wait

for at least 3 minutes, then reconnect it.

2 Press [Í/I] on the unit to switch it on. If the unit still cannot be

operated, consult the dealer.

MP3 cannot be read.

≥ You may not be able to play MP3 if you have copied a

multi-session disc that has no data between sessions.

≥

When creating a multi-session disc, it is necessary to close the session.

≥ The amount of data on the disc is too small. Set the amount of

data to above 5 MB.

Charging does not start during standby mode.

≥ Turn the unit on. Check the charging has started, and then turn

the unit to standby mode. (l 6)

Noise is heard.

≥ When a device is connected to both the AUX IN jack and the DC

OUT terminal, noise may be generated depending on the device.

In this case, remove the USB cable from the DC OUT terminal.

The remote control does not work properly.

≥ The battery is depleted or inserted incorrectly. (l 4)

Incorrect display or play does not start.

≥ Make sure that the disc is compatible with this unit. (l 15)

≥

There is moisture on the lens. Wait for about an hour and then try again.

No response when [1/;] is pressed.

≥ Disconnect the USB device and then reconnect it. Alternatively,

turn the unit off and on again.

The USB drive or its contents cannot be read.

≥ The USB drive format or its contents is/are not compatible with the

unit (l 15).

≥ The USB host function of this product may not work with some

USB devices.

Slow operation of the USB flash drive.

≥ Large file size or high memory USB flash drive takes longer time

to read.

The elapsed time displayed is different from the

actual play time.

≥ Copy the data to another USB device or backup the data and

reformat the USB device.

Static or noisy reception is heard while listening to

a radio broadcast.

≥ Confirm the antenna is properly connected. (l 5)

≥ Adjust the position of the antenna.

≥ Try to keep a certain amount of distance between the antenna and

AC mains lead.

≥ Try using an outdoor antenna if there are buildings or mountains

nearby. (l 5)

≥ Turn the TV or other audio players off or separate it from this unit.

≥ Keep this unit away from mobile phones if there is interference.

Pairing cannot be completed.

≥ Check the Bluetooth

device condition.

The device cannot be connected.

≥ The pairing of the device was unsuccessful or the registration has

been replaced. Try re-pairing the device. (l 7)

≥ This unit might be connected to a different device. Disconnect the

other device and try re-pairing the device. (l 7)

The device is connected, but audio cannot be

heard through this unit.

≥ For some built-in Bluetooth

devices, you have to set the audio

output to “SC-HC39” manually. Read the operating instructions for

the device for details.

The sound is interrupted.

≥ The device is out of the 10 m communication range. Place the

Bluetooth

device closer to this unit.

≥ Remove any interference between this unit and the device.

≥ Other devices that use the 2.4 GHz frequency band, such as

wireless routers, microwaves, cordless phones, etc. are

interfering. Place the Bluetooth

device closer to this unit and

distance it from the other devices.

≥ Select “MODE 1” for stable communication. (l 8)

The One-Touch Connection (NFC feature) is not

working.

≥ Make sure the unit and the NFC feature of the device are turned

on. (l 7)

To return all settings to the factory defaults

When the following situations occur, reset the

memory:

≥ There is no response when buttons are pressed.

≥ You want to clear and reset the memory contents.

1 Disconnect the AC mains lead. (Wait for at least

3 minutes before proceeding to step 2.)

2 While pressing and holding down [Í/I] on the

unit, reconnect the AC mains lead.

≥ Keep holding down [Í/I] until “---------” appears on the

display.

3 Release [Í/I].



≥ All the settings are returned to the factory defaults. You will

need to reset the memory items.

General

Remote control

Disc

USB

Radio

Bluetooth

SC-HC39EC~RQT9944-R.book 13 ページ２０１４年４月２日　水曜日　午後３時２９分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHC39EC Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCHC39EC

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info