Bedienungsanleitung Panasonic SCHC3DB (Seite 15 von 24) (Englisch)

612848

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

RQTX0256

To Action

change the

settings

Repeat steps 1 to 4 and 6.

change the source

or volume

 Press [z, PLAY] to clear

zPLAY indicator from the

display.

 Make changes to the source or

volume.

 Perform steps 5 and 6.

check the settings

(when the unit is

on or in standby

mode)

Press [CLOCK/TIMER] repeatedly

to select zPLAY 1, zPLAY 2 or

zPLAY 3.

cancel

Press [z, PLAY] to clear the timer

indicator from the display.

The timer will start at the preset time, with the volume

increasing gradually to the preset level.

The timer comes on at the set time every day if the

timer is on.

The unit must be in the standby mode for the timer to

function.

If you turn the unit off and on again while the timer is

functioning, the finish time setting will not be activated.

When external unit is selected as the source when

the timer comes on, the system turns on and engages

external unit as the source. If you wish to playback

from the portable audio equipment, activate the

equipment’s play mode and increase the volume. (See

the portable audio equipment’s instruction manual.)

•

Sound adjustment

Digital remaster is effective on CD (MP3)

Analog remaster is effective on iPod and AUX

This feature reproduces the frequencies lost during

recording to give you a sound closer to the original.

Press [RE-MASTER] during play to select

“ON RE-MASTER”.

Each time you press the button:•

Enables you to enjoy the powerful bass effect.

Press [D.BASS] during play to select “ON D.BASS”.

Each time you press the button:

The actual effect depends on the music source.

•

Enable you to add natural width and depth to the stereo

sound.

To activate

Press [SURROUND] to display “ ” indicator.

To cancel

Press [SURROUND] again to clear “ ” indicator.

Surround sound is less discernible when listening

through headphones.

If interference in FM stereo reception increases, cancel

the surround sound effect.

•

Enable you to enjoy lower or higher pitch sound.

 Press [BASS/TREBLE] repeatedly to select your

desired setting.

Setting Effect

BASS For lower pitch sound

TREBLE For higher pitch sound

 Press [u/t] or [y/i] to adjust the level.

The tone level can be varied within -4 to +4.

Enhancing the bass

Re-master–Enjoying more natural sound

You can change the sound effect by selecting Preset EQ

or adjusting the bass or treble effect.

Selecting sound effects

Press [PRESET EQ] repeatedly to select your desired

setting.

Setting Effect

HEAVY Adds punch to rock

CLEAR Clarifies higher frequencies

SOFT For background music

VOCAL Adds gloss to vocal

FLAT No effect

Preset EQ

Bass or treble

Enjoying surround sound

Note

MP3

ON RE-MASTER OFF RE-MASTER

HEAVY

CLEAR SOFT

VOCAL

FLAT

BASS TREBLE

Original Display

ON D.BASS OFF D.BASS

You can select the sound input level of your portable

audio equipment.

Press [PLAY MODE] repeatedly to select your desired

setting.

Each time you press the button:

Select “NORMAL” if the sound is distorted when level

“HIGH” is activated.

•

Level adjustment (during AUX mode)

HIGH NORMAL

Note

SC-HC3_DBEB (RQTX0256-B).indd 15 4/1/2009 3:56:51 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHC3DB Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info