External unit (continued)
Compatible devices
The USB connectivity enables you to connect and play MP3 tracks from
USB mass storage class.
Preparation:
Before connecting any USB mass storage device to the unit, ensure
that the data stored therein has been backed up.
It is not recommended to use a USB extension cable. The device
connected via the cable will not be recognised by this unit.
Open the USB cover.
Reduce the volume and connect the USB mass storage device.
Press [USB q/h] to start play.
•
•
Stop
Press [g, ]. “RESUME” is displayed. The
position is memorised.
Press [USB q/h] to resume play.
Press [g, ] again to clear the position.
Pause
Press [USB q/h]. Press again to resume play.
Skip track
Press [u] or [i].
Skip album
Press [e,r].
Direct access play
(Play starts with the
track you select.)
Press [e,r] to select the album.
Press [i] once and then the numeric
buttons to select the track.
To remove the USB mass storage device, select a source other than
“USB”.
Removing the USB mass storage device with it selected as a source
can damage the data stored in the device.
•
Devices which are defined as USB mass storage class:
USB devices that support bulk only transfer
USB devices that support USB 2.0 full speed
•
•
For other operating functions, they are similar as those described in
“Disc operations” (➡ page 8, 9).
Notes on USB
Supported format: Files with extension “.mp3” or “.MP3”
CBI (Control/Bulk/Interrupt) is not supported.
A device using NTFS file system is not supported [Only
FAT 12/16/32 (File Allocation Table 12/16/32) file system is
supported].
Depending on the sector size, some files may not work.
This unit can access up to 255 albums and 2500 tracks.
The maximum number of tracks in a folder is 999 tracks.
Only one memory card will be selected when connecting a
multiport USB card reader, typically the first memory card
inserted.
Disconnect the USB card reader from the unit when you remove
the memory card. Failure to do so may cause malfunction to the
device.
When you connect the digital audio player to the USB port, it
charges all the time when the unit is on.
•
•
•
•
•
•
•
•
•
USB mass storage device (not included)
USB operations
When the following situations occur, reset the memory:
There is no response when buttons are pressed.
You want to clear and reset the memory contents.
To reset memory
Disconnect the AC mains lead. (Wait for at least 3 minutes before proceeding to step 2.)
While pressing and holding down [8] on the main unit, reconnect the AC mains lead.
“--------” appears on the display.
Release [8].
All the settings are returned to the factory preset. You will need to reset the memory items.
•
•
Memory reset (Initialization)
14 15
