Bedienungsanleitung Panasonic SCHC55EG (Seite 6 von 92) (Englisch, Polnisch)

612854

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

RQTX1265

Attaching the unit to a wall (optional)

∫ Supplied accessories

≥ 1 Safety holder screw B (Silver)

≥ 2 Safety holder screws C (Black)

≥ 1 Safety holder D (> 4)

≥ 2 Safety holders E (> 4)

≥ 2 Wall mount brackets

≥ 2 Rear pads

∫ Commercially available accessories

(not supplied)

≥ 4 Wall bracket fixing screws F

≥ 1 Safety holder fixing screw G



≥ Use screws with a nominal diameter of ‰4 mm, which are suitable to the

material of the wall (e.g., wood, steel, concrete, etc.)

1 Detach the stand from the unit.

1 Unscrew the fixing screw A (4 pieces) at the bottom

of the unit.

2 Gently pull the bottom of the stand and slide the

stand off the unit.

≥ Keep the removed screws and stand in a safe place.

Installation accessories

≥ Keep the wall mount brackets out of reach of children to prevent

swallowing.

≥ Keep the rear pads out of reach of children to prevent swallowing.

≥ Keep the screws out of reach of children to prevent swallowing.

≥ Keep the safety holder out of reach of children to prevent swallowing.

Safety precautions

WARNING!

≥ Only a qualified building contractor shall install or uninstall this

unit.

– Improper installation may cause the unit to fall, resulting in injury.

≥ To prevent injury, the unit must be securely attached to the wall in

accordance with the installation instructions.

≥ Do not install the unit where it cannot support the load.

– If the mounting parts are not strong enough, this may cause the unit to

fall, resulting in injury.

≥ Do not use installation methods other than instructed.

– This may cause the unit to fall and be damaged, resulting in injury.

≥ Do not install the unit at locations other than vertical walls.

– This may cause the unit to fall and be damaged, resulting in injury.

≥ Take the safety factor for mounting strength into account.

– Insufficient strength will cause the unit to fall, resulting in injury.

≥ The wall on which the unit is to be attached to should be capable of

supporting 33 kg per screw.

– Insufficient strength of the walls will cause the unit to fall in the long

run.

≥ Do not disassemble or modify the wall-mounting hanger.

– This will cause the unit to fall and be damaged, resulting in injury.

CAUTIONS!

≥ Do not install this unit at humid or dusty locations, or locations

where airborne grease or steam may come into contact with the

unit, or under an air conditioner where water may drip onto the unit.

– This may have negative impact on the unit, resulting in fire or electric

shock.

≥ Secure enough space of more than 30 cm above the main unit and

more than 10 cm on the left and right sides respectively. Keep space

between the wall and rear of the unit clear of obstructions.

– Blocking the exhaust holes on the main unit may result in fire.

≥ Use the designated components for installation.

– Otherwise, the main unit may fall and be damaged, resulting in injury.

≥ Prevent the mounting screws or AC mains lead from coming into

contact with metal parts inside the wall during installation.

– Failure to do so may cause electric shock.

≥ When removing the main unit, remove the wall mounting screws as

well.

– Otherwise the wall mounting screws may hit a person and lead to

injury.

≥ Install the unit at a height where the USB port and operation buttons

can be seen for safe operation.

– Operating at improper position may cause the unit to fall and be

damaged, resulting in injury.

∫ Notes on installation

≥ Before installation, read the “Safety precautions” and “Wall mount

instructions” for correct installation.

≥ For optimal performance and to prevent potential problems, do not

install this unit:

– at locations other than vertical walls.

– near a sprinkler or a sensor.

– near high-voltage lines or power sources.

– near heating device.

– at locations where the unit is subject to vibration or impact.

– near sources of magnetism, heat, vapour, airborne grease, etc.

– at locations where there may be water droplets (e.g. under an air

conditioner).

≥ Do not install this unit under ceiling lights (e.g. spotlight, halogen

light, etc.).

– Failure to do so may bend the cabinet or lead to damage caused by

high heat.

≥ Use a proper installation method that suits the structure and

material of the wall.

≥ Use a soft blanket or cloth to prevent damage to the product or floor

during installation.

≥ When tightening screws, make sure the screws are not

loosely-tightened or overtightened.

≥ Secure a safe surrounding area and pay attention to safety during

installation.

≥ Panasonic is not liable for incidental or consequential damages

resulting from improper installation or operation.

Wall mount instructions

Before installation, turn the unit off and disconnect the AC mains lead

from the household mains socket.

Bottom of main unit

Stand

Soft blanket or cloth

Fixing screw

SC-HC55_35-RQTX1265.book 6 ページ２０１１年３月２７日　日曜日　午後７時３２分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHC55EG Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCHC55EG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info