Bedienungsanleitung Panasonic SCHC55EG (Seite 15 von 92) (Englisch, Polnisch)

612854

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

RQTX1265

ENGLISH

This unit works as a Bluetooth

hands-free for your mobile

phones.



≥ This unit does not work with Headset Profile (HSP).

≥ When the mobile phone is too close to the microphone of this unit, noise may

occur. Always keep the mobile phone away from the microphone of this unit

when making a call.

≥ The audio from a disc will be paused while calling in hands-free mode.

1 Press [ , iPod] repeatedly to select

“BLUETOOTH”.

2 Press [ MENU] to display “DISCONNECT?”

and then press [OK].

A confirmation message is displayed.

3 Press [2, 1] to select “YES” and then press

[OK].



≥ The connection can also be stopped when you disable Bluetooth

transmission on the connected Bluetooth

device.

Preparation

Press [ , iPod] repeatedly to select “BLUETOOTH”.

≥ These functions are unavailable if a device is connected. Disconnect the

Bluetooth

devices to display these functions.

∫ To register more devices

1 Press [ MENU] repeatedly to select

“NEW DEV.” and then press [OK].

≥ The unit enters pairing mode and “PAIRING” starts blinking

on the display.

2 While this unit is in pairing mode, access the

Bluetooth

menu of the Bluetooth

device and

execute a Bluetooth

search to find this unit

(SC-HC55).

≥ If prompted for the passkey, enter “0000”.

∫ To select communication quality

1 Press [ MENU] repeatedly to select

“LINK MODE”.

2 Press [2, 1] to select the following modes and

then press [OK].

∫ To select Auto Link mode

1 Press [ MENU] repeatedly to select

“AUTO LINK”.

2 Press [2, 1] to select the following modes and

then press [OK].



≥ When “LINKING” is displayed, pressing [ MENU] is invalid.

≥ Auto Link works only if your device supports A2DP.

≥ The communication quality settings also depend on the settings on the

connected device. If the communication quality of the connected device is set

for stable communication, the quality of the audio will remain low even if this

unit is set to “MODE 2”.

Hands-Free Profile (HFP)

To answer a call

(“IN CALL” blinks)

Press [ ]. “CALLING” starts blinking on

the display (Talk into the unit’s

microphone).

Press [ ] again to transfer the call to the

mobile phones (“TRANSFER” blinks. You

may now converse using the mobile

phone).

To cancel a call Press [ ].

To adjust the

sound volume

Press [+, VOL ,–] (Adjustable from

“TEL VOL 1” to “TEL VOL 10”).

To mute the

microphone

Press [MUTE]. Press again to cancel.

(During “MIC MUTE”, the caller is not able

to hear your voice).

Disconnecting a Bluetooth

device

Advanced functions

MODE 1: Connection with emphasis on communication

stability

MODE 2: Connection with high bit rate for good audio quality

(Communication might easily be disconnected in

this mode, select “MODE 1” if this occurs).

ON: This unit will automatically select “BLUETOOTH”

when a Bluetooth

device is connected.

OFF

SC-HC55_35-RQTX1265.book 15 ページ２０１１年３月２７日　日曜日　午後７時３２分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHC55EG Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCHC55EG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info