Bedienungsanleitung Panasonic SCHC57DBEB (Seite 12 von 28) (Englisch)

612856

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

RQT9709

1 Press [SETUP] on the remote control repeatedly to

select “NET SETUP” and then press [OK].

{. “SETTING” is indicated on the display.

(The Wi-Fi

status indicator blinks purple.)

2 Connect your iPhone to this unit’s wireless

network called “Setup _ _ _ _ _ _”*

1, 2

≥ Once “Setup _ _ _ _ _ _” is selected, the iPhone is

connected with this unit.

3 Start Safari on your iPhone and type

“http://192.168.1.12/” into the URL address field

and display the page.

{. This unit’s setup window is displayed.

4 Select “Search wireless network”.

5 Select and input the details.

6 Perform the “Additional settings”. (> right)

If they do not apply, continue to the next step.

7 Select “JOIN” to apply the settings.

{. In the pop-up screen select “OK” to continue.

– Select “CANCEL” to return to the setup window.

{. The wireless status indicator lights blue.

– You can now close the Safari browser.

{. When the configuration is finished “SUCCESS” is

indicated on this unit’s display.

8 Press [OK] on the remote control to complete the

settings.

9 Connect your iPhone back to your home wireless

network.



≥ Enable Java and Cookies in your browser settings.

≥ To cancel this setting in the middle, press [Í] to turn off the

unit.

*1: “ _ ” stands for a digit that is unique to each set.

*2: Make sure that DHCP is enabled for the network setting on

the iPhone.

*3: If you have set your wireless network to be invisible, select

“BACK” and refer to “Alternative settings”. (> above)

[1] Select your home wireless network name.*

[2] Type the password.

[3] Select “NEXT”.

If “FAIL” is displayed press [OK]. Then check the

wireless network password and other settings and

start again from step 1.

Alternative settings

Instead of steps 4 and 5:

Select “Manual settings”.

1 Type your home wireless network name into

the “Network name (SSID)” field.

2 Select the encryption method from the

“Security system” drop down list.

3 Type the password into the “Password” field

and then select “NEXT”.

Additional settings

In step 6:

If your home wireless network has been setup to

use specific IP Addresses, Subnet Mask, Default

Gateway, Primary DNS, etc.

Select “Advanced network settings”.

{. Input the required addresses into each field and select

“OK”.

≥ To change the settings back to DHCP, select “ON” from

the “DHCP” drop down list.

If you want to change the name of this unit that is

displayed as the AirPlay speakers.

Select “Edit STEREO SYSTEM name”.

{. Only ASCII characters can be used.

{. Type a new name into the “STEREO SYSTEM name”

field and select “OK”.

SC-HC57DB~RQT9709-1B.book Page 12 Friday, March 2, 2012 3:31 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHC57DBEB Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info