Bedienungsanleitung Panasonic SCHC58DBGS (Seite 15 von 32) (Englisch)

613074

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

RQT9756

You can preset up to 20 DAB/DAB+ stations.

Preparation

≥ Press [RADIO] repeatedly to select “DAB/DAB+”.

1 While listening to a DAB broadcast

Press [OK].

2 Press [3, 4] to select the desired preset channel

number and then press [OK].



≥ You cannot preset stations when the station is not

broadcasting or when the secondary service is selected.

≥ The station occupying a channel is erased if another station

is preset in that channel.

∫ Listening to preset DAB/DAB+ stations

Preparation*

1 Press [RADIO] to select “DAB/DAB+”.

2 Press [PLAY MENU] repeatedly to select

“TUNEMODE”.

3 Press [3, 4] to select “PRESET” and then press

[OK].

1 Press [RADIO] to select “DAB/DAB+”.

2 Press [:/6] or [5/9] to select the

station.



≥ To select by preset, make sure that stations have already

been preset manually.

≥ To add additional preset stations, select the station using the

method mentioned in “Listening to the memorised stations”

(l 14).

Some DAB/DAB+ stations provide a secondary service

as well as the primary service. If the station you are

listening to is providing secondary service, “ ” will be

displayed.

1 While “ ” is displayed.

Press [PLAY MENU] repeatedly to select “DAB

SECONDARY”.

2 Press [3, 4] to select the secondary service and

press [OK].



≥ The setting will go back to primary service when changes are

made (e.g. the station is changed).

*1: The “TUNEMODE” setting is memorised until it is changed.

Press [DISPLAY] to change the display.

The information will scroll through the display.

Each time you press the button:

If the DAB broadcast includes time information, this

unit’s clock will be automatically updated.

1 Press [PLAY MENU] repeatedly to select “AUTO

CLOCK ADJ”.

2 Press [3, 4] to select “ON ADJUST” and then

press [OK].



≥ Select “OFF ADJUST” to turn the automatic clock adjustment

function off.

To check the signal reception quality, at least 1

frequency block needs to be successfully memorised.

≥ If “SCAN FAILED” is displayed after “DAB/DAB+” is

selected or after an auto scan, proceed to “Manually

tuning 1 frequency block” (l below)

≥ If stations have already been memorised to this unit,

proceed to “Checking the DAB/DAB+ signal

reception quality” (l 16)

∫ Manually tuning 1 frequency block

Use this function to scan 1 frequency block after

adjusting the position of the DAB antenna.

Preparation

Note down a frequency block that can be received in

your region (e.g., 12B 225.648 MHz).

1 While “SCAN FAILED” is displayed.

Adjust the position of the DAB antenna.

2 Press [PLAY MENU] repeatedly to select

“MANUAL SCAN”.

3 Press [3, 4] to select the frequency block that is

receivable in your region and then press [OK].

Presetting DAB/DAB+ stations

Listening to the secondary service

Display

Dynamic label: Information about the

broadcast

PTY display: Programme type

Ensemble label: The name of the ensemble

Frequency display: The frequency block and

frequency is displayed.

Time display: Current time

Automatic clock adjustment

To verify or improve the signal

reception quality

SC-HC58DBEB_DBGN_GS~RQT9756-B.book 15 ページ２０１３年５月２８日　火曜日　午後４時５６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHC58DBGS Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCHC58DBGS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info