Bedienungsanleitung Panasonic SCHC58DBGS (Seite 19 von 32) (Englisch)

613074

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

RQT9756

Others

As a factory preset, this unit will always turn off

automatically if there is no sound output and no

operation for approx. 30 minutes.

To cancel this function

1 Press [SETUP] repeatedly to select “AUTO OFF”.

2 Press [3, 4] to select “OFF” and then press [OK].



≥ To turn automatic standby on, select “ON” in step 2.

The brightness of this unit’s display can be changed.

1 Press [SETUP] repeatedly to select “DIMMER”.

2 Press [3, 4] to select “ON” and then press [OK].



≥ To cancel the dimmer, select “OFF” in step 2.

When other Panasonic equipment responds to the

supplied remote control, change the remote control

code.

1 Press [CD] to select “CD”.

2 While pressing and holding [SELECTOR] on the

unit, press and hold [CD/RADIO] on the remote

control until the unit's display shows “REMOTE 2”.

3 Press and hold [OK] and [CD/RADIO] on the

remote control for at least 4 seconds.



≥ To change the mode back to “REMOTE 1”, repeat the steps

above but replace the button pressed on the remote control

from [CD/RADIO] to [ ].

Occasionally, Panasonic may release updated

software for this unit that may add or improve the way

a feature operates. These updates are available free of

charge.

Preparation

≥ Turn the unit on.

≥ Connect this unit to the wireless network. (l 7)

– Make sure that the wireless network is connected

to the Internet.

– If “D.CONNECT” is set to “ON”, change the setting

to “OFF” and connect this unit to a wireless

network that is connected to the Internet.

1 Press [SETUP] repeatedly to select

“SW UPDATE” and then press [OK].

2 Press [3, 4] to select “UPDATE? Y” and then

press [OK] to start the update.

3 When the update has finished successfully,

“SUCCESS” is displayed.

4 Disconnect the AC mains lead and reconnect it

after 3 minutes.

≥ Downloading will require several minutes. It may take

longer or may not work properly depending on the

connection environment.



≥ If you do not want to update the unit, select “UPDATE? N”

and then press [OK] in step 2.

≥ If there are no updates, “NO NEED” is displayed after step 2.

∫ Checking the software version

1 Press [SETUP] repeatedly to select “SW VER.” and then

press [OK].

{. The version of the installed software is displayed.

2 Press [OK] to exit.

Automatic standby

≥

This setting cannot be selected when “DAB/DAB+” (

[SC-HC58DB]

)

or “FM” is the source.

Display brightness

Changing the unit and remote

control code

Software update

DO NOT DISCONNECT the AC mains lead while

one of the following messages is displayed.

– “LINKING”, “UPDATING” or “%”

(“  ” stands for a number.)

≥ During the update process, no other operations can be

performed.

SC-HC58DBEB_DBGN_GS~RQT9756-B.book 19 ページ２０１３年５月２８日　火曜日　午後４時５６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHC58DBGS Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCHC58DBGS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info