Bedienungsanleitung Panasonic SCHC58GN (Seite 9 von 32) (Englisch)

613079

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

RQT9756

4 Select “Search wireless network”.

5 Select and input the details.

≥ Check your home wireless network name

(Network name (SSID)) and password for this

network. This can often be found on the wireless

network router itself.

6 Select “JOIN” to apply the settings.

≥ In the pop-up screen, select “OK” to continue.

– Select “Cancel” to return to the setup window.

7 The unit’s settings are completed when

“SUCCESS” is displayed and the Wi-Fi status

indicator stops blinking and lights in blue.

8 Make sure to connect your iPhone back to your

home wireless network*

9 To use AirPlay, turn to page 10.

*1: “ _ ” stands for a digit that is unique to each set.

*2: Make sure that DHCP is enabled for the network setting on

the iPhone.

*3: If you have set your wireless network to be invisible, select

“BACK” and refer to “Alternative settings”.

*4: To use the AirPlay function, connect the iPhone to the

wireless network selected in step 5. (l above)

≥ The below settings are the alternative or additional settings

for “Method 3”. (l 8)



≥ Enable Java and Cookies in your browser settings.

≥ This unit can also be set using the WPS PIN code.

Replace step 3 of “Method 2” with the following steps.

(Before starting, refer to the wireless network router’s

operating instructions for details on how to enter the PIN

code.)

1 While “WPS” is flashing press and hold

[– NETWORK SETUP] again to display the 8 digit PIN

code.

{. Wi-Fi status indicator blinks purple.

2 Enter the PIN code into the wireless network router.

[1] Select your home wireless network

name.*

[2] Type the password.

If “FAIL” is displayed press [OK], check the wireless

network password and other settings and start again

from step 1.

Advanced network settings

Alternative settings

Instead of steps 4 and 5

Select “Manual settings”.

1 Type your home wireless network name into

the “Network name (SSID)” field.

2 Select the encryption method from the

“Security system” drop down list.

3 Type the password into the “Password” field

and then select “JOIN”.

Additional settings

If your home wireless network has been configured

to use specific IP Addresses, Subnet Mask, Default

Gateway, Primary DNS, etc.

Before step 6

Select “Advanced network settings”.

{. Input the required addresses into each field and select

“JOIN”.

≥ To change the settings back to DHCP, select “ON” from the

“DHCP” drop down list.

If you want to change the name of this unit that is

displayed as the AirPlay speakers.

Before step 4

Select “Additional settings”.

1 Select “Edit STEREO SYSTEM name”.

2 Type a new name into the

“STEREO SYSTEM name” field.

{. Only ASCII characters can be used.

3 Select “OK”.

4 If this unit is already connected to your home

wireless network:

– Select “Additional settings”, and then select

“Exit”.

If this unit is not connected to your home

wireless network:

– Continue to step 4 of “Method 3”.

SC-HC58DBEB_DBGN_GS~RQT9756-B.book 9 ページ２０１３年５月２８日　火曜日　午後４時５６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHC58GN Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCHC58GN

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info