Bedienungsanleitung Panasonic SCHC58GN (Seite 23 von 32) (Englisch)

613079

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

RQT9756

The following messages or service numbers may

appear on the unit’s display.

“--:--”

≥ You plugged the AC mains lead in for the first time or there was a

power failure recently. Set the time (l 18).

“ADJUST CLOCK”

≥ Clock is not set. Adjust the clock accordingly.

“ADJUST TIMER”

≥ Play timer is not set. Adjust the play timer accordingly.

“AUTO OFF”

≥ The unit has been left unused for about 30 minutes and will shut

down within a minute. Press any button to cancel it.

“CANNOT SET”

≥ Select an audio source other than “AIRPLAY” or “BLUETOOTH”.

“CHECKING CONNECTION”

≥ The unit is checking the connected iPod/iPhone/iPad.

≥ If this display keeps appearing, make sure that the battery of the

iPod/iPhone/iPad is not depleted and that the iPod/iPhone/iPad is

turned on and connected correctly (l 6).

“DL ERROR”

≥ The software download has failed. Press any button to exit.

Please try again later.

≥ The server cannot be found. Press any button to exit. Make sure

that the wireless network is connected to the Internet.

“ERROR”

≥ Incorrect operation is performed. Read the instructions and try

again.

“F” (“  ” stands for a number.)

≥ There is a problem with this unit.

Note down the displayed number, disconnect the AC mains lead

and consult your dealer.

“FAIL”

≥ Updating or setting has failed. Read the instructions and try again.

“ILLEGAL OPEN”

≥ Sliding door is not in correct position. Turn the unit off and on

again. If this display appears again, consult the dealer.

“IPOD_DOCK OVER CURRENT ERROR”

“IPOD_PORT OVER CURRENT ERROR”

≥ The iPod/iPhone/iPad is drawing too much power. Disconnect the

iPod/iPhone/iPad and turn the unit off and on again.

≥ The USB device is drawing too much power. Switch to “CD”

mode, remove the USB and turn the unit off.

“LEVEL 0”

≥ There is no link between this unit and the wireless network router.

Try the following operations:

– Check that the wireless network router is turned on.

– Turn this unit off and on again.

– Reset the wireless network settings. (l 7)

If the problem persists, consult your dealer.

“LEVEL j”

≥ When “D.CONNECT” is set to “ON” the Wi-Fi signal strength

cannot be checked. To check the Wi-Fi signal strength from the

wireless network router, set “D.CONNECT” to “OFF”. (l 11 )

“LINKING”

≥ This unit is communicating with the wireless network router to

complete the network settings.

Depending on the wireless network router this process may take a

few minutes. Try moving this unit closer to the wireless network

router.

“NOCONNECT”

≥ This unit is not connected to the network.

Check the network connection. (l 7)

“NODEVICE”

≥ The iPod/iPhone/iPad device is not inserted correctly. Read the

instructions and try again (l 6).

≥ The battery of the iPod/iPhone/iPad is depleted. Charge the iPod/

iPhone/iPad and turn it on before connecting.

≥ The USB device is not inserted. Check the connection.

“NO DISC”

≥ Insert the disc to be played (l 6).

[SC-HC58DB]

“NO MEMORY”

≥ There are no preset DAB/DAB+ stations to select. Preset some

channels. (l 15)

“NO PLAY”

≥ A CD that is not in CD-DA or MP3 format is inserted. It cannot be

played.

≥ If there are more than 255 albums or folders (audio and

non-audio), some of the MP3 files in these albums may not be

read and played. Transfer these music albums to another USB.

Alternatively, reformat the USB device and save these music

albums prior to saving the other non-audio folders.

[SC-HC58DB]

“NO SIGNAL”

≥ This station cannot be received. Check your antenna (l 5).

“NOT SUPPORTED”

≥ You have connected an iPod/iPhone/iPad that cannot be played

(l 24).

≥ If the iPod/iPhone/iPad is compatible, turn it on and connect it

correctly.

≥ The connected iPod touch/iPhone/iPad is not connected to a

wireless network. Connect it to a wireless network and try again.

(l 7)

“READING”

≥ The unit is checking the CD information. After this display has

disappeared, start operating.

“REMOTE ” (“  ” stands for a number.)

≥ The remote control and this unit are using different codes. Change

the code on the remote control.

– When “REMOTE 1” is displayed, press and hold [OK] and [ ]

for more than 4 seconds.

– When “REMOTE 2” is displayed, press and hold [OK] and [CD/

RADIO] for more than 4 seconds.

“SET WI-FI”

≥ The connected iPod touch/iPhone/iPad is not connected to a

wireless network. Connect it to a wireless network and try again.

(l 7)

[SC-HC58DB]

“SCAN FAILED”

≥ Stations are not receivable. Check your antenna and try Auto

scanning (l 14).

If “SCAN FAILED” is still displayed find the best signal reception

with the “MANUAL SCAN” tuning function. (l 15)

Messages

SC-HC58DBEB_DBGN_GS~RQT9756-B.book 23 ページ２０１３年５月２８日　火曜日　午後４時５６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHC58GN Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCHC58GN

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info