Bedienungsanleitung Panasonic SCHT1000PP (Seite 13 von 56) (Englisch)

613117

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

RQT7061

RECORDING

The unit calculates a recording rate that enables the recording to fit

in the time you set (within the remaining time on the disc) and with

the best possible picture quality.

1 While stopped

Press [F.Rec].

2 Press [2, 1] to select “Hour” and

“Min.” and press [3, 4] to set the

recording time.

You can also set the recording time with the numbered

buttons.

3 Press [3, 4, 2, 1] to select “Start”

and press [ENTER].

Recording starts.

To show the remaining time

Press [STATUS].

[Note]

It may not be possible to record to the end of the program if the

remaining time doesn’t allow.

For your reference

≥Recording time is reduced if you repeatedly pause recording.

≥The recording mode automatically becomes FR mode.

[RAM]

To change the audio recording mode

Press [SHIFT]r[AUDIO].

∫ While receiving MTS audio (Multi-channel

Television Sound Stereo)

[.Stereo: Main audio (stereo)

l SAP: Secondary audio program (SAP)

a- Mono: Main audio (monaural)

e.g., “Stereo” is selected

“((” appears when the unit is receiving

the audio type you selected.

[Note]

≥If you change the sound setting while recording, the recorded

sound will also change. [RAM]

≥If recorded in SAP mode, main audio is also recorded. [RAM]

≥It will not be possible to alter the sound in the following cases:

–When a DVD-R is in the disc tray.

–When recording mode is XP and “LPCM” has been selected in

the Audio menu, “Audio Mode for XP Recording” (➡ page 39).

≥When recording MTS sound onto DVD-R or recording using LPCM,

only one of either the main channel or the sub channel can be

recorded. Select at “Select MTS” (➡ page 39).

≥If the broadcast is “MonoiSAP”, audio will be monaural even if you

select Stereo mode.

≥Select “Mono” if reception is poor during a stereo broadcast.

Pictures being recorded are unaffected.

1 Switch [HOME THEATER, TV] to “TV”.

2 Press [TV/VIDEO] to change the television’s input mode to

“TV”.

3 Press [W X CH] to change channels.

You can also select the channel with the numbered buttons.

This is a simple way of specifying a time to stop recording when you

are in a hurry or before you go to bed.

During recording

Press [¥ REC] to select the recording

time.

Each time you press the button:

0:30 "# 1:00 "# 1:30 "# 2:00 "# 3:00 "# 4:00

^"""""""" Counter (cancel) ,""""""""}

To show the remaining time

Press [STATUS].

For your reference

≥This does not work during timer recordings (➡ page 14) or while

using Flexible Recording (➡ left).

≥Recording stops and the set time is cleared if you press [∫].

≥The set time is cleared if you change the recording mode or

channel while recording is paused.

Preparation

Connect a video cassette recorder to this unit’s input terminals

(➡ page 44).

1 While stopped

Press [INPUT SELECT] to select the

input channel for the equipment you

have connected.

Select L1, L2 or L3.

≥You can also select the input channel by pressing [W X CH].

2 Press [REC MODE] to select the

recording mode (XP, SP, LP or EP).

3 Start play on the other equipment.

4 Press [¥ REC] at the point you want to

start recording.

Recording starts.

To skip unwanted parts

Press [;] to pause recording. (Press again to restart recording.)

To stop recording

Press [∫].

[Note]

≥When recording using L1, L2 or L3 terminals, only the sound

received at the time of recording will be recorded.

≥If Flexible Recording (➡ left) is used instead of steps 2 and 4,

settings can be made so that recording continues to the end of the

video.

Recording the best quality pictures

within the set amount of time—Flexible

Recording

Selecting the audio recording mode

FLEXIBLE REC

Start Cancel

Record on FR mode

ENTER

SELECT

RETURN

Set up rec time

2 Hour 15 Min.

Maximum rec time

1 Hour 00 Min.

CH 12

Stereo

No disc

((

Watching the television while recording

Specify a time to stop recording

Recording from a video cassette

recorder

Almost all videos and DVD software on sale have been

treated to prevent illegal copying. Any software that has

been so treated cannot be recorded using this unit.

e.g.,

7061en.book 13 ページ２００３年６月１６日　月曜日　午前１０時１２分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHT1000PP Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info