Bedienungsanleitung Panasonic SCHT330 (Seite 31 von 32) (Englisch)

613122

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

RQT8103

Menus Page

Picture abnormal or unviewable

Progressive video

Listening to the radio

Television operation

Unit displays

Television displays

The Setup menu cannot be

accessed.

≥Select “DVD/CD” as the source.

≥Cancel all group, program and random play.

—

Picture distorted. ≥Ensure that the unit is connected directly to the television, and is not connected through a video

cassette recorder.

Picture size doesn’t fit the

screen.

≥Change “TV Aspect” in the “Video” tab.

≥Use the television to change the aspect. If your television does not have that function, change

“4:3 Aspect” in Display Menu.

≥Change the Zoom setting.

The television may display

incorrectly or colors appear

faded.

≥The unit and television are using different video systems.

[Southeast\Asia\and[Thailand[ Use a multi-system or NTSC television.

[Others] Use a multi-system or PAL television.

≥The system used on the disc does not match your television.

– PAL discs cannot be correctly viewed on an NTSC television.

– This unit can convert NTSC signals to PAL 60 for viewing on a PAL television (“NTSC Disc

Output” in “Video” tab).

—

Menu is not displayed correctly. ≥Restore the zoom ratio to “a1.00”.

≥Set “Subtitle Position” in Display Menu to “0”.

≥Set “4:3 Aspect” in Display Menu to “Normal”.

Auto zoom function does not

work well.

≥Turn off TV’s zoom function.

≥Use the other preset aspect ratios or manual adjustment.

≥Z

oom function may not work well, especially in dark scenes and may not work depending on the type of disc.

—

The picture on the television

disappears or stripes appear on

the screen.

≥Mobile telephone chargers can cause some disturbance.

≥If you are using a TV indoor antenna, change to an outdoor antenna.

≥T

he television antenna wire is too close to the unit. Separate the antenna wire of the television from the unit.

—

There is ghosting when

progressive output is on.

≥This problem is caused by the editing method or material used on DVD-Video, but should be

corrected if you use interlace output. Change “Video Output Mode” in Picture Menu to “625i (or

576i)” or “525i (or 480i)”.

Pictures not in progressive

output.

≥Press [SHIFT]i[PROGRESSIVE] so “PRG” is displayed. Or select “625p (or 576p)” or “525p (or

480p)” in “Video Output Mode” in Picture Menu.

≥If the unit is connected to the television through VIDEO OUT, S-VIDEO OUT or SCART (AV)

terminal, output will be interlace even if “PRG” is displayed.

11,

Noise is heard.

“ST” flickers or doesn’t light.

Sound is distorted.

≥Adjust the position of the FM or AM antenna.

≥Use an outdoor antenna.

—

A beat sound is heard. ≥Turn the television off or move it away from the unit. —

A low hum is heard during AM

broadcasts.

≥Separate the antenna from other cables. —

Cannot operate the TV. ≥To use functions labeled in orange, while pressing [SHIFT], press the corresponding button. —

The display is dark. ≥Select “Bright” in “FL Dimmer” in the “Others” tab. 19

“NO PLAY” ≥You inserted a disc the unit cannot play; insert one it can.

≥You inserted a blank disc.

—

“NO DISC” ≥You haven’t inserted a disc; insert one.

≥You haven’t inserted the disc correctly; insert it correctly.

—

“F61” ≥Check and correct the speaker cord connections.

If this does not fix the problem, there is a power supply problem. Consult the dealer.

“DVD U11” ≥Disc may be dirty. Wipe it clean. 9

“ERROR” ≥Incorrect operation performed. Read the instructions and try again. —

“DVD H∑∑”

∑∑ stands for a number.

≥Trouble may have occurred. The number following “H” depends on the status of the unit. Turn the

unit off and then back to ON. Alternatively, turn the unit off, disconnect the AC mains lead, and

then reconnect it.

≥

If the service numbers fail to clear, note the service number and contact a qualified service person.

—

“/” ≥The operation is prohibited by the unit or disc. —

“Cannot play group xx, content xx”

“Cannot display group xx,

content xx”

≥You are trying to play an incompatible group or content. —

“Group xx, content xx is

protected”

≥You are trying to play a protected group or content. You cannot play it. —

“Cannot play audio”

“No audio”

≥Audio has not been recorded, or recorded in a format this unit cannot playback. Video playback

only is possible.

“Check the disc” ≥This disc may be dirty.

“This disc may not be played in

your region”

≥You can only play DVD-Video if their region number is the same or includes the same region

number as the unit or if the DVD-Video is marked “ALL”. Confirm the region number for the unit

on the rear panel.

Cover

page

No on-screen display. ≥Select “On” in “On-Screen Messages” in the “Display” tab. 19

Troubleshooting guide

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHT330 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info