Bedienungsanleitung Panasonic SCHT400 (Seite 8 von 20) (Englisch)

613126

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

RQT6361

Step

1 2

Settings

Change the settings to suit your equipment to the environment in which you are using it. Before making any changes, read the descriptions of

the settings, note the factory settings and ranges, and refer to the equipment’s instructions.

SFC MODE

Press at the same

time to enter the

setting mode.

SIZE

Set the size to suit

your speakers

DISTANCE

Enter the distance of

the front, center and

surround speakers

from the seating

position

FILTER

Change the cut-off

for bass output from

the front speakers

Change the distance so that the sound from all the speakers (except for

the subwoofer) reaches you at the same time.

You can select distances between 3 and 30 feet at one-foot intervals.

The factory settings are: FRONT and CENTER: 10 FEET

SURROUND: 5 FEET

Adjusting

speaker output

level

SPEAKERS

Turn SPEAKERS

on.

Adjust the level of the other speakers based on the output of the front

speakers. (Adjust the volume of the front speakers with [VOLUME].)

C (center), SR (surround right), and SL (surround left) can be adjusted

between –10 dB and +10 dB, with 0 being the level of the front speakers.

Adjust center and surround output to the same apparent level of the front

speakers.

For SW (subwoofer), you can select “---” so there is no output, “MIN” for

minimum output, a level between 1 and 19, or “MAX” for maximum output.

Adjust subwoofer output so it is balanced with the front speakers.

Subwoofer output is easily influenced by the source. You can also change

its level while playing something to achieve a better effect (

page 13).

D-INPUT

Digital input

Change these settings to suit the connections you have made to the three

digital input terminals, COAX, OPT1 and OPT2, so that the correct source

is selected when you turn [INPUT SELECTOR].

The factory settings are: CD: COAX

DVD:OPT 2

TV: OPT 1

SFC MODE

Press at the same

time to enter the

setting mode.

Change these settings only if you replace the included speakers.

LARGE:For speakers that can reproduce a full sound range, particularly

the bass range below 100 Hz.

SMALL:This is the factory setting and the optimum setting for the included

speakers. This setting is sufficient for most speakers if you are

using a subwoofer.

NONE: For speakers you haven’t connected (center or surround).

The factory settings are: FRONT, CENTER and SURROUND: SMALL

If you disconnect the subwoofer (SUB-WFR), select NO. Otherwise, leave

the setting as YES.

Change this setting only if you replace the included speakers. You can

change the cut-off for the bass output from the front speakers.

You can raise the cut-off from 100 Hz to either 150 Hz or 200 Hz.

The optimum setting for these speakers is 150 Hz.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHT400 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCHT400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info