Bedienungsanleitung Panasonic SCHT500E (Seite 36 von 40) (Englisch)

613128

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

RQT6835

Reference

Troubleshooting guide

Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do

not solve the problem, consult your dealer for instructions.

Power Page

Operation

Sound

No power. ≥Insert the AC mains lead and system cable securely. 9

The unit is automatically

switched to the standby mode.

≥The unit was switched to standby by the sleep timer. 30

No response when buttons

pressed.

≥Some operations may be prohibited by the disc.

≥The unit may not be operating properly due to lightning, static electricity or some other external

factor.

Reset procedure:

Press [Í] to switch the unit to the standby mode and then back to ON.

Alternatively, press [Í] to switch the unit to the standby mode, disconnect the AC mains lead,

and then reconnect it.

—

No operations can be performed

with the remote control.

≥Check that the batteries are installed correctly.

≥The batteries are depleted: Replace them with new ones.

≥Point the remote control at the remote control sensor and operate.

—

Cannot switch on the television

with the remote control.

≥Press [TV] first to operate the television. —

Play doesn’t start (or stops

immediately) when you press

[1] (play).

≥Condensation has formed: Wait 1 to 2 hours for it to evaporate.

≥This unit cannot play discs other than the ones listed in these operating instructions.

≥You can only play DVD-Video if their region number is the same or includes the same region

number as the unit or if the DVD-Video is marked “ALL”. Confirm the region number for the unit

on the rear panel.

≥The disc may be dirty and may require cleaning.

≥Ensure that the disc is installed with the label of the side to be played facing upwards.

≥Check that the DVD-RAM has something recorded on it.

—

Cover

—

Cannot select alternative

languages.

≥This function is dependent on software availability.

≥Try selecting from the disc’s menu if one is available.

—

No menu play. ≥This function is dependent on software availability. —

No subtitles. ≥This function is dependent on software availability.

≥Subtitles are cleared from the television. Display the subtitles.

—

The position of the subtitles is

incorrect.

≥Change the position of the subtitles with “Subtitle Position” in the GUI screen. 25

Soundtrack and/or subtitle

language is not the one selected

with the SETUP menus.

≥This function is dependent on software availability. —

Cannot change angle. ≥This function is dependent on software availability. Even if a disc has a number of angles

recorded, these angles may be recorded for specific scenes only.

—

The SETUP menu cannot be

accessed.

≥Select “DVD/CD” as the source.

≥Cancel all group, program and random play.

—

Cannot add markers. ≥You cannot add markers while playing a play list or if the disc’s play time doesn’t appear on the

unit’s display.

—

There are already markers. [RAM] ≥The unit reads and displays the markers added with a DVD video recorder. You can clear them

but reappear when you switch the unit to standby, change the source, or open the disc tray.

—

Marker numbers I added are

different when I call them up.

[RAM]

≥The unit numbers markers by time so they change when you add and delete them. —

Cannot select random or

program play.

≥You cannot select random or program play with some DVD-Video. —

Folders deeper than the eighth

layer on a data CD are not

displayed correctly.

≥Folders deeper than the eighth layer are displayed as the eighth layer. —

You have forgotten your ratings

password.

Reset all the SETUP settings to

Factory Preset.

≥While stopped and “DVD/CD” is the source, press and hold [∫] on the unit and [S10] on the

remote control for about 3 seconds until “Initialized” disappears from the television. Turn the unit

off and on again.

All settings will return to the default values.

—

No sound.

Distorted sound.

≥Check the connections.

≥Turn the volume up.

≥Turn muting off.

≥Switch off the unit, determine and correct the cause, then switch the unit on.

Causes include:

–Shorting (bare wires touching) of positive and negative speaker wires.

–Using speakers with an impedance lower than that rated for this unit.

–Straining of the speakers through excessive volume or power.

–Using the unit in a hot environment without proper ventilation.

—

Humming heard during play. ≥An AC mains lead or fluorescent light is near the subwoofer. Keep other appliances and cords

away from the subwoofer.

—

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHT500E Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info