Bedienungsanleitung Panasonic SCHT670 (Seite 23 von 36) (Englisch)

18696

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

RQT7534

10HBI

Sound field/sound quality operations

Sound fields

¡ Super Surround, Center Focus and Subwoofer Level adjustment

(A page 25) cannot be performed if headphones are connected

(“ERROR” appears on the display.)

¡ You may experience a reduction in sound quality when these sound

field systems are used with some sources. If this occurs, turn the

sound field system off.

Dolby Digital and DTS

¡ Dolby Digital and DTS are digital encoding systems used on DVD

to carry surround sound. Both were originally developed for use in

cinemas.

¡ This unit automatically recognizes and decodes these systems.

Play a Dolby Digital or DTS source.

The Dolby Digital or DTS indicator lights.

L To down-mix Dolby Digital or DTS (multiple-channel)

signals to 2 channels

Press [SHIFT]+[MIX 2CH].

To cancel, press [SHIFT]+[MIX 2CH] again.

When “D.MIX” flshes on the display

The DVD-Audio contains multiple-channel signals that cannot be down-

mixed.

Dolby Pro Logic II

Only when “DVD/CD” is selected as the source

Dolby Pro Logic II is an advanced decoder that derives 5 channel

surround (Left and Right Front, Center, Left and Right Surround)

from any stereo program material, whether or not it has been

specifically Dolby Surround encoded.

While playing a stereo source

Press [pPL II].

Each time you press the button:

MOVIE→MUSIC→OFF

Movie: Use this mode when playing movie software, especially

videotapes, recorded in Dolby Surround.

Music: Adds surround effects to stereo sources.

OFF: Cancel

Note

¡ This does not have any effect when playing multi-channel audio.

¡ This will only have an effect on speakers.

¡ “pPL II” lights when there is a Dolby Pro Logic II effect.

Speaker level adjustments

Adjust the volume level of the speakers so they are the same

apparent level as the front speakers where you would normally be

sitting and listening. (L, R A below, “Balance”)

Preparation

Press [DVD/CD].

1 While stopped

Press [SHIFT]+[TEST] for a test signal.

L: Front left

C: Center

R: Front right

RS: Right surround

LS: Left surround

2 Press [+, –, VOLUME] to set the volume level

normally used for listening.

3 Press [8] (to increase) or [9] (to decrease) to adjust

speaker level.

C, RS, LS: –6 dB to +6 dB

To stop the test signal, press [SHIFT]+[TEST] again.

L To adjust speaker level

(Effective when playing multi-channel audio or Dolby Pro Logic

II is on.)

1 Press [CH SELECT] to select the speaker.

L→C→R→RS→LS→SW

SW: Subwoofer

¡ When Dolby Pro Logic II is turned on, SW does not appear

on the display and is not adjustable.

2 Press [8] (to increase) or [9] (to decrease).

L, R: (A below)

C, RS, LS, SW: –6 dB to +6 dB

Balance

You can adjust the balance of the front speakers.

1 During play

Press [CH SELECT] to select “L” or “R”.

2 Press [

:].

89; :

TEST

CH SELECT

DVD/CD

MIX 2CH

0PL II

SHIFT

VOLUME

–

→

Software encoded with Dolby

Digital can be identified with

this mark.

Software encoded with DTS can

be identified with this mark.

RQT7534(2)PC(23) 10/2/04, 4:50 pm23

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHT670 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCHT670

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info