Bedienungsanleitung Panasonic SCHT700EB (Seite 41 von 44) (Englisch)

618112

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

RQT6756

Reference

Sound

Picture

Listening to the radio

No sound.

Distorted sound.

≥Check the connections.

≥Turn the volume up.

≥Turn muting off.

≥Switch off the unit, determine and correct the cause, then switch the unit on.

Causes include:

–Shorting (bare wires touching) of positive and negative speaker wires.

–Using speakers with an impedance lower than that rated for this unit.

–Straining of the speakers through excessive volume or power.

–Using the unit in a hot environment without proper ventilation.

6, 8

—

Humming heard during play. ≥An AC mains lead or fluorescent light is near the subwoofer. Keep other appliances and cords

away from the subwoofer.

—

Picture distorted. ≥Some distortion is normal during SEARCH. —

No picture. ≥Check the connection.

≥Make sure the television is on.

≥Ensure the television’s video input setting (e.g., VIDEO 1) is correct.

—

The picture shown on the

television is not normal.

(The sides of the picture are cut

off, the picture is stretched

horizontally, or black bands

appear at the top and bottom of

the screen.)

≥Go to Video in the SETUP menus, and change “TV Aspect” to suit your television.

≥Use the television to change the aspect to the correct one.

If your television cannot change the aspect when input is progressive, try changing 4:3

Aspect with the GUI screen.

≥Ensure that the unit is connected directly to the television, and is not connected through a video

cassette recorder.

≥Connect to the component video (480P) input terminals on a television compatible with this

unit’s copy guard system. You cannot view progressive video if your television is not compatible.

≥Change the size with the variable zoom function.

—

There is ghosting when

progressive output is on.

≥Press [PROGRESSIVE] so the indicator goes out. This problem is caused by the editing

method or material used on DVD-Video, but should be corrected if you use interlace output.

Picture quality is poor. ≥Check the settings in the GUI screen’s Picture Menu.

[For\the\United\Kingdom\and\Russia]

≥When you are using the component video out terminals to connect to a television

check to see if the “Video Out (AV/Component)” setting is set to “Video/Y PB PR” or “S-Video/Y

PB PR” in the SETUP menu.

The picture on the television

disappears or stripes appear on

the screen.

≥Mobile telephone chargers can cause some disturbance.

≥The location and orientation of the antenna are incorrect. If you are using an indoor antenna,

change to an outdoor antenna.

≥The television antenna wire is too close to the unit. Separate the antenna wire of the television

from the unit.

—

Menus not displayed correctly. ≥Change the zoom ratio to “k1.00”.

≥With the GUI screen, change “Subtitle Position” to “0” or change “4:3 Aspect” to “Normal”.

Noise is heard.

“ST” flickers or doesn’t light.

Sound is distorted.

≥Adjust the position of the FM or AM antenna.

≥Use an outdoor antenna.

—

A beat sound is heard. ≥Turn the television off or separate it from the unit. —

A low hum is heard during AM

broadcasts.

≥Separate the antenna from other cables and cords. —

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHT700EB Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info