Bedienungsanleitung Panasonic SCHT75 (Seite 7 von 40) (Englisch)

18704

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Simple setup

RQT6183

Speaker cords

Attaching to a wall

Front and surround speakers can be attached to a wall.

Attach four speaker feet to each speaker, ensuring they do not

cover the holes.

Set the speaker onto screws and slide through bracket to lock

into position.

]HT95]

[HT75]

The method for attaching speakers to a wall is the same except

that there is only one bracket.

Note

The wall or pillar on which the speakers are to be attached should

be capable of supporting 10 kg (22 Ib.) for SB-AFC286 and 5 kg

(11 Ib.) for SB-AFC95 per screw.

Attaching to speaker stands

Ensure the following conditions are met when you purchase your

speaker stands.

≥Observe the diameter and length of the screws and the distance

between screws as shown in the diagram.

≥The stands must be able to support over 10 kg (22 Ib.) for

SB-AFC286 and 5 kg (11 Ib.) for SB-AFC95.

≥The stands must be stable even if the speakers are in a high

position.

Attach the stickers to the speaker cords.

≥Attach the numbered stickers to the end of the speaker

cords so the numbers match the positions of the speak-

ers shown in the diagram.

FRONT L

FRONT R

SURROUND L

SURROUND R

CENTER

SUBWOOFER

FRONT L

FRONT R

SURROUND L

SURROUND R

CENTER

SUBWOOFER

FRONT L

About 10 cm (4")

≥Connect the cords to the terminals of same color so the num-

bers on the stickers match the numbers under the terminals.

≥Never short-circuit positive (i) and negative (j) speaker wires.

≥Be sure to connect only positive (red or gray) wires to positive

(i) terminals and negative (black or gray with blue stripe) wires

to negative (j) terminals.

Incorrect connection can damage the speakers.

≥After you have completed setup and connection, wind the ex-

cess cord and keep together with string.

≥

The speaker nets cannot be removed.

Notes on speaker use

≥You can damage your speakers and shorten their useful life if

you play sound at high levels over extended periods.

FRONT

SURROUND

TER

D R

FER

Center speaker

Front speaker (right)

Surround speaker (right)

Surround speaker (left)

Subwoofer

Front speaker (left)

Twist the vinyl tip and pull off.

Gray

+ Red

- Black

Black

Red

Blue

+ Gray (no stripe)

- Gray with blue stripe

Reduce the volume in the following cases to avoid damage.

–When playing distorted sound.

–When the speakers are receiving howling from a micro-

phone or record player, noise from FM broadcasts, or con-

tinuous signals from an oscillator, test disc, or electronic

instrument.

–When adjusting the sound quality.

–When turning the unit on or off.

Screw (not included)

Speaker feet (included)

Speaker feet

(included)

30–35 mm

⁄16q–1

⁄8q)

Ø7.5–9.5 mm

(

⁄64q–

⁄8q)

7–9 mm

(

⁄32q–

⁄64q)

Screw (not included)

106 mm (4

⁄64q)

Attach the stands

with these holes.

60 mm (2

⁄64q)

5 mm (

⁄64q),

pitch 0.8 mm

(

⁄32q)

Plate thickness

plus 7 to 10 mm

(plus

⁄32q to

⁄64q)

Speaker stand

(not included)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHT75 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info