Bedienungsanleitung Panasonic SCHT810V (Seite 59 von 64) (Englisch)

18714

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

RQT6951

Glossary

Decoder

A decoder restores the coded audio signals on DVDs to normal. This

is called decoding.

Dolby Digital

This is a method of coding digital signals developed by Dolby

Laboratories. Apart from stereo (2-channel) audio, these signals can

also be multi-channel audio. A large amount of audio information

can be recorded on one disc using this method.

Dolby Pro Logic

A surround system where a 4-channel audio track is recorded as

2 channels and then is restored to 4 channels for play. The surround

channel is monaural and can reproduce up to 7 kHz.

DTS (Digital Theater Systems)

This surround system is used in many movie theaters around the

world. There is good separation between the channels, so realistic

sound effects are possible.

Dynamic range

Dynamic range is the difference between the lowest level of sound

that can be heard above the noise of the equipment and the highest

level of sound before distortion occurs.

Film and video

DVD-Videos are recorded using either film or video. Usually, film is

recorded at 24 frames per second, the rate movies are filmed at,

while video is recorded at 30 frames per second.

Frame still and field still

Frames are the still pictures that make moving pictures. About thirty

are shown each second. A frame still may appear blurred but overall

quality is high.

Two fields appear alternately to make up one frame. A field still is

not blurred but picture quality is lower.

Interlace and progressive output

NTSC, the video signal standard, has 480 interlaced (I) scan lines,

whereas progressive scanning uses twice the number of scan lines.

This is called 480P.

I/P/B

MPEG 2, the video compression standard adopted for use with

DVD-Video, codes frames using these 3 picture types.

I: Intra coded picture

This picture has the best quality and is the best to use when

adjusting the picture.

P: Predictive coded picture

This picture is calculated based on past I or P-pictures.

B: Bidirectionally-predictive coded picture

This picture is calculated by comparing past and future I and

P-pictures so it has the lowest volume of information.

Linear PCM (pulse code modulation)

These are uncompressed digital signals, similar to those found on

CDs.

To clean this unit, wipe with a soft, dry cloth.

≥Never use alcohol, paint thinner or benzine to clean this unit.

≥Before using chemically treated cloth, read the instructions that

came with the cloth carefully.

Cleaning the video heads

Dirt on the video heads can cause poor recording and play.

To clean the heads, insert and eject a tape 5 to 10 times in

succession.

If the picture does not improve, use an optional head-cleaning

cassette (part number NV-TCL30PT). If the problem persists, seek

advice from a qualified service person.

Maintenance

6951en.book 59 ページ２００３年４月４日金曜日午後２時２４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHT810V Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info