Bedienungsanleitung Panasonic SCHT820V (Seite 40 von 56) (Englisch)

18712

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

RQT7388

Changing settings

1 While VHS MENU is displayed (➜ page 38)

Press [34] to select the “OPTION”

and press [ENTER].

2 Press [34] to select the item and

press [21] to change the setting

(➜ below).

To exit the settings screen

Press [MENU] until the screen disappears.

Panasonic video cassette recorders use the same remote control

system so they may respond unintentionally to a command from this

remote control. Change the code on this unit and its remote control

(the two must match) if you place another Panasonic video cassette

recorder close together.

≥Use “1”, the factory preset, under normal circumstances.

1 While OPTION menu is displayed

Press [34] to select the “REMOTE

CONTROL” and press [ENTER].

2 Press [21] to select the code (1 or 2)

and press [ENTER].

The remote control code on the unit has been set.

3 While pressing [ENTER] on the remote

control, press and hold the numbered

button ([1] or [2]) corresponding to the

code you selected in step 2.

The remote control code on the remote control has been set.

The following is displayed when you use a remote control with the

different code.

The unit’s remote control code

Change its code to match the unit’s (➜ step 3).

OPTION

OPTION 1/2

OSD ON OFF

TAPE SELECT

T120 T160 T180

BLUE BACK ON OFF

JET NAVIGATOR ON OFF

DELETE NAVIDATA NO YES

JET SEARCH x27 x35

SELECT : s/r:

END :MENU

2 1

≥

OPTION 2/2

MTS MAIN SAP MONO

REMOCON CODE 1 2

DISPLAY

BRIGHT DIM OFF

SELECT : s/r:

END :MENU

2 1

≥

REMOTE CONTROL

Items Settings (Underlined items are the factory preset.)

OSD (➜ page 41, On-screen display) ON

: Messages appear on the television for about five seconds

after you perform operations.

OFF: Messages do not appear.

TAPE SELECT

Set the length of tape you are using so the unit can show the correct

remaining time.

T120

: T30, T60, T90, T120 tapes

T160: T140, T160 tapes

T180: T180 tapes

BLUE BACK ON

: The screen shows a blue background when you play

unrecorded portions.

OFF

JET NAVIGATOR (➜ page 36) ON: Jet Navigator data automatically registered.

OFF

: Data not registered.

DELETE NAVIDATA

Delete all the Navigation data registered in the unit.

See page 36 to delete data on a single tape.

YES: Then press [ENTER] when you want to delete all the Jet

navigator data.

JET SEARCH (➜ page 30)

Set the speed for JET SEARCH when playing EP and VP tapes.

a27 a

Select a27 if the picture is poor at a35.

MTS (➜ page 41, Changing audio)

Set the MTS (Multi-channel Television Sound Stereo) reception

type.

MAIN

: To receive stereo broadcasts.

SAP: To receive SAP when being broadcast.

MONO: To receive monaural broadcasts (e.g., when reception is

poor).

REMOTE CONTROL 1

DISPLAY

Set the brightness of the unit's display when the unit is in standby

mode.

BRIGHT: The display is bright all the time.

DIM

: The display dims when the unit is in standby mode.

OFF: The display turns off when the unit is in standby mode.

VHS

7388en.book 40 ページ２００３年１２月２２日　月曜日　午後９時３９分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHT820V Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info