Bedienungsanleitung Panasonic SCHT830V (Seite 43 von 52) (Englisch)

18716

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

RQT7921

Other speaker setup options

∫ Attaching to a wall

1 Drive a screw (not included) into a wall.

2 Attaching 4 rubber pads to the rear of the speaker.

3 Fit the speaker securely onto the screw(s) with the

hole(s).

[Note]

≥The wall or pillar on which the speakers are to be attached should be

capable of supporting 10 kg (22 Ibs) per screw.

Consult a qualified building contractor when attaching the speakers to

wall. Improper attachment may result in damage to the wall and

speakers.

≥Use of optional speaker cables is recommended for wall-mounted

front speakers. (You can also remove the speaker cables from the

pipes supplied with this system).

∫ Fitting speaker stands (not included)

Ensure the stands meet these conditions before purchasing them.

Note the diameter and length of the screws and the distance between

screws as shown in the diagram.

≥The stands must be able to support over 10 kg (22 Ibs).

≥The stands must be stable even if the speakers are in a high

position.

30–35 mm

/16q–1

/8q)

‰7.5–9.4 mm

(

/64q–

/8q)

7.0–9.0 mm

(

/32q–

/32q)

Wall or pillar

‰3.0–4.0 mm

(

/8q–

/32q)

Center speaker

e.g.

In this position, the

speaker will likely fall

if moved to the left or

right.

Move the speaker

so that the screw is

in this position.

Surround speaker

.....

180 mm

/16z)

Front speaker

Rubber pads

Speaker stand

(not included)

Plate thickness plus 7 mm to

10 mm (plus

/32q to

/32q)

Surround speaker

e.g.

5mm (

/16q),

pitch 0.8 mm (

/32q)

Attach the stands to

these metal screw holes.

60 mm (2

/8q)

Optional connections

[A] You can record sound from discs, video cassette

tapes, or radio, etc., to a tape deck.

1 Discs

Press [DVD/VHS] to select “DVD/CD” as the source.

Video cassette tapes

Press [DVD/VHS] to select “VHS” as the source.

Radio

Press [FM/AM] to select “FM” or “AM”.

2 Start recording and play.

Refer to the manual of the other unit for details.

[B] You can play back the sound from a tape deck/laser

disc player, etc., through this unit’s speakers.

1 Press [VHS] to put the remote control in VHS mode.

2 Press [DVD/VHS] to select “VHS” as the source.

3Press [W CH] or [X CH] to select “AV” channel.

4 Start playback from the external source. (For details, refer to

external unit’s operating instructions manual.)

When connecting a record player

We recommend using a record player with a built-in phono equalizer. If

your player doesn’t have a built-in equalizer, connect it first to a

separate equalizer and then to the unit.

Listening to an external source/

Recording to other equipment

Audio cable (not included)

White (L)

Red (R)

RF IN

RF OUT

LOOP

EXT

ANT

LOOP

ANT

GND

DIGITAL

TRANSMITTER

DVD/VHS

EXT

DVD

COMPONENT

VIDEO OUT

S-VIDEO

OUT

VIDEO

SB-WA830

PLAY

OUT

REC

A B

RQT7921-P_ENG.book 43 ページ２００５年２月４日　金曜日　午後４時５８分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHT830V Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info