Bedienungsanleitung Panasonic SCHTB15EG (Seite 25 von 32) (Englisch)

618123

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Operations

VQT3R83

Advanced

operations

∫ Changing the dual audio

Change the dual audio from main to secondary.

Confirm the digital audio output setting on the

connected TV or player, etc. is set to “Bitstream”.

2 Press and hold [HDMI 1/2] for more than 2 sec.

While the indicator of the current setting is

flashing, press [HDMI 1/2] to change the setting.

≥ The setting works only when the dual audio is

available in the audio source.

≥

The setting is maintained until it is changed again.

≥ The same setting is used for [TV] and [HDMI 1/2]

audio sources.

∫ Remote control code

When other Panasonic devices respond to this

system’s remote control, change the remote control

code on the active subwoofer and the remote control.

Preparation

≥ Turn off all other Panasonic products.

≥ Turn on this system.

Change the remote control code to code 2:

1 Aim the remote control at this system’s remote

control sensor.

2 Press and hold [MUTE] and [HDMI 1/2] on the

remote control for more than 4 sec.

≥ All the indicators will blink for 10 sec when the

code of this system is changed.

≥

The setting is maintained until it is changed again.



≥ If this system does not operate after changing the code,

repeat steps 1 and 2.

≥ To change the remote control code to code 1, repeat the

steps above, but replace [HDMI 1/2] with [TV].

∫ To turn off the 3D surround effect and

clear-mode dialog effect

Depending on your preference, it is possible to use

only the Dolby Virtual Speaker effect by turning off

the 3D surround effect and the clear-mode dialog

effect.

1 Press and hold [TV] for more than 2 sec.

≥ The indicator for the current setting blinks for 10 sec.

2 While the indicator is blinking press [TV] to

change the setting.

≥ The setting changes each time [TV] is pressed.

≥ The setting will be reset to on when this system is turned off.

∫

To turn off VIERA Link “HDAVI Control”

When “HDAVI Control” compatible equipment does

not work well with this system, for example, it is

possible to turn off this function as follows:

≥ When VIERA Link is turned off the ARC function

is not available. Be sure to connect the optical

digital audio cable. (> 19)

1 Press and hold [MUTE] on the remote control

and [s VOL] on the active subwoofer for more

than 2 sec.

After the setting has changed, turn off all the

connected devices and then turn them on again.

∫ To reduce the clear-mode dialog effect

When the dialog does not sound natural while the

volume is set low, for example, it is possible to

reduce the dialog enhancing effect as follows:

Press and hold [TV] on the remote control and

[s VOL] on the active subwoofer for more than

2 sec.

∫ To turn off the volume limitation

If a state of the lowered volume disturbs you every

time this system turns on, for example, it is possible

to turn off this function as follows:

Press and hold [MUTE] on the remote control and

[VOL r] on the active subwoofer for more than

2 sec.



The settings of VIERA Link “HDAVI Control”, the clear-mode dialog

effect and the volume limitation remain intact even if you switch this

system to standby mode. To turn these 3 functions back on, this

system must be set back to the factory preset. (

26)

≥ All the indicators will blink once when the setting is changed.

The following settings are unnecessary under

general usage conditions of the system.

A : Main

B : Secondary

A, B : Main and secondary

Only Dolby Virtual Speaker is on.

3D surround effect and clear-mode

dialog effect are also on.

SC-HTB15EGEBGNGS_VQT3R83.book Page 25 Tuesday, June 28, 2011 2:34 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHTB15EG Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCHTB15EG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info