Bedienungsanleitung Panasonic SCHTB500 (Seite 19 von 36) (Englisch)

618141

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Operating Instructions

No sound (or image).

≥ Turn muting off. (> 14)

≥ Check the connections to the other devices.

(> 11)

≥ Check the audio output settings on the connected

device.

≥ Turn this unit off and then on again.

≥ When connected to an ARC compatible TV,

check if the TV’s connected terminal is ARC

compatible.

≥ If the connections are correct, there might be a

problem with the cables. Reconnect the unit with

different cables.

≥ When using the optical digital audio cable, this

system is not able to play audio with a sampling

frequency greater than 48 kHz.

Sound is not heard when playing DVD-Audio.

≥ This may occur due to digital copyright protection

of the disc when using the optical digital audio

cable. This system is not able to play audio with a

sampling frequency greater than 48 kHz.

If the “ D/DTS” indicator is blinking, unplug

the AC mains lead and consult your dealer.

If the “TV, BD/DVD” indicator is blinking, try the

following to correct the problem. Consult your

dealer if the problem persists.

≥ Turn the connected device off and on again.

≥ Turn this unit off and reconnect the HDMI cables

and then turn this unit on again.

If this unit is connected to a non-Panasonic

ARC compatible TV, connect using an optical

digital audio cable. (> 11)

≥ After connecting the optical digital audio cable,

the setting of this unit must be changed to specify

the audio input terminal. (> 20, “TV Audio”)

Audio is output from the TV speakers and not

this unit’s.

≥ When connected to a VIERA Link (HDAVI

Control) compatible TV, change the audio output

settings to this unit. (> 16)

Both main and secondary audio are output

simultaneously.

≥ Change the digital audio output setting on the TV

or connected device and then select the desired

audio channel. (For details, refer to the operating

instructions for the TV or connected device.)

No power.

≥ Ensure the AC mains lead of the active

subwoofer is connected properly.

After turning the subwoofer on, it immediately

turns off.

≥ Unplug the AC mains lead and consult your

dealer.

No sound from the subwoofer.

≥ Check that the active subwoofer is turned on.

≥ Check that the wireless link indicator lights green.

(> 13)

The wireless link indicator lights red.

≥ There is no link between this unit and the active

subwoofer.

jCheck that this unit is turned on.

jEnsure that the digital transmitter is fully

inserted into the digital transmitter dock on this

unit. (> 12)

jTurn the active subwoofer off and then back on.

Alternatively, turn the active subwoofer off,

disconnect the AC mains lead and then

reconnect it.

Consult your dealer if the problem persists.

The audio from the subwoofer is interrupted.

≥ The active subwoofer is automatically seeking a

clear channel. If the interference persists, try

moving the other wireless devices to another

location outside the range of the active

subwoofer or move the active subwoofer nearer

to this unit. (> 9)

Sound

Active subwoofer

SCHTB500EGGNGS_RQTX1185-B.book Page 19 Wednesday, July 7, 2010 5:18 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHTB500 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCHTB500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info