Bedienungsanleitung Panasonic SCHTX5 (Seite 25 von 28) (Englisch)

618350

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

RQT9478

Troubleshooting and

other information

Glossary/Speciﬁ cations

Speciﬁ cations

 AMPLIFIER SECTION

RMS Output Power (each channel driven)

1 kHz, 10 % total harmonic distortion

Front (L/R) 90 W per ch (4 Ω)

100 Hz, 10 % total harmonic distortion

Subwoofer 105 W per ch (3 Ω)

Total Power Output 285 W

Input sensitivity/Input impedance

AUDIO IN (TV, AUX4) 450 mV/47 kΩ

S/N ratio

HDMI (BD/DVD IN, AUX1), DIGITAL IN (TV, AUX2, AUX3) 80 dB

Tone controls

BASS 50 Hz, +6 dB to -6 dB

TREBLE 20 kHz, +6 dB to -6 dB

Input/Output Terminals

AUDIO IN

Analogue Input (TV, AUX4) 2

DIGITAL IN

Optical (TV, AUX2) 2

Coaxial (AUX3) 1

HDMI

Input (BD/DVD IN, AUX1) 2

Output (TV OUT) 1

This system supports “HDAVI Control 4” function.

 GENERAL

Power supply AC 220 V to 240 V, 50 Hz

Power consumption 73 W

In standby condition Approx. 0.4 W

HDMI off mode Approx. 0.1 W

Operating temperature range 0°C to 40°C

Operating humidity range 35% to 80% RH (no condensation)

 RACK SYSTEM SECTION

Dimensions (W x H x D) 1050 mm x 444 mm x 482 mm

Mass Approx. 30 kg

Maximum loading Weight 80 kg

Shelf Board Max loading weight Top 12 kg/Bottom 12 kg

 SPEAKER SYSTEM SECTION

FRONT (L/R) 1-Way 1 Speaker System (Bass Reﬂ ex)

6.5 cm Cone Type Full Range x2

SUBWOOFER 1-Way 2 Speaker System (Bass Reﬂ ex)

13 cm Cone Type Woofer x2

Note

1. Specifications are subject to change without notice.

Total harmonic distortion is measured by the digital spectrum analyser.

Glossary

Analogue

Audio signals produced from L/R audio output terminals of

general equipment is called analogue audio.

CPPM (Content Protection for Prerecorded Media)

This is the copyright protection technology which prevents ﬁ le copy of DVD audio.

Decoder, Decode

Decoder is the device to enable us to hear audio data that is encoded on

DVD, etc., as a normal audio signal. This process is called Decode.

Deep Colour

This system can reproduce greater colour gradation (4096

steps) when connected to compatible TV and recorder, etc.

You can enjoy exceptionally rich, natural-looking colours, with

smooth, detailed gradation and minimal colour banding.

Digital

Blu-ray Disc players, DVD recorders, DVD players, and CD players are

usually equipped with digital output terminals. Connect through the digital

terminal to enjoy digital surround sounds such as Dolby Digital and DTS.

Dolby Digital

Digital sound compression technology developed by Dolby Laboratories.

Compatible with surround sound as well as 2-channel stereo sound. With this

technology, you can keep massive amount of audio data in a disc efﬁ ciently.

Dolby Pro Logic

This system can process not only Dolby Surround, but also other 2-channel

sources to produce a 5.1-channel sound for a more realistic sound ﬁ eld. It

is also possible to enhance old movies recorded in stereo with this dynamic

5.1-channel sound. This system uses Dolby Pro Logic to add surround effects

to stereo sources such as video cassettes and CDs.

Dolby Virtual Speaker

This system allows you to enjoy a surround effect with two front speakers and

a subwoofer. This is not merely a “virtual surround” effect, but rather uses the

optimal speaker arrangements and listening positions for 5.1-channel sound.

Down-sampling

This is the process of resampling by reducing the sampling rate

of a signal that was sampled at a certain rate.

DTS (Digital Theater Systems)

Surround system used in most movie theatres. Separation works

well between channels, resulting in realistic surround effects.

Dynamic range

Dynamic range is the difference between the lowest level of sound that can be heard

above the noise of the equipment and the highest level of sound before distortion occurs.

HDMI (High Deﬁ nition Multimedia Interface)

HDMI enables you to transmit digital audio and video signals using a single cable.

You can also transmit control signals using HDMI connections.

Multi-channel LPCM (Linear PCM)

This is the uncompressed audio signal encoded digitally. Multi-channel LPCM signals

used for Blu-ray Disc, DVD audio, etc. offer playback with higher-sound quality.

Up to 7.1 channel LPCM signals can be input to this system. Also, you can enjoy

7.1-channel with wider surround effects with SH-FX70 (not included) connection.

Optical

Using optical ﬁ bre cable for digital signal input/output from DVD, CD,

etc., provides better sound quality for playback or recording compared to

analogue. Only possible with equipment that has an optical terminal.

PCM (Pulse Code Modulation)

This is one of the methods that enable analogue sounds to be

converted to digital sounds without compression.

This method is used for music CD, etc.

Sampling frequency

Sampling is the process of converting the heights of sound

wave (analogue signal) samples taken at set periods into digits

(digital encoding). Sampling frequency is the number of samples

taken per second, so larger numbers mean faithful reproduction

of the original sound.

Standby through function

When this system and TV and Blu-ray Disc player/DVD recorder

etc. are connected with HDMI cables, image/audio from Blu-

ray Disc player/DVD recorder etc. can still be transmitted to TV

through this system even though the system is turned off.

This is useful when you want to enjoy late night viewing only

with the television’s speakers.

Images recorded with x.v.Colour or Deep Colour are also

supported.

Surround signal

Audio signal made up with front speakers, center speaker

and surround speakers. For this system, surround signal is

automatically played by Dolby Virtual Speaker.

WHISPER-MODE SURROUND

Even when the sound volume level is low, you can enjoy

dynamic surround playback similarly as during normal playback.

This is convenient when listening at night.

x.v.Colour

This is a name of products compliant with ISO Standard for

wider colour space: “xvYCC”. This system supports x.v.Colour.

1080p

This is one of the digital hi-vision images.

1080 is the number of effective scanning lines that constitute

the actual screen. This enables every detail to be beautifully

expressed. Images are less ﬂ ickered with progressive method

that scans in order from the top. This system supports 1080p.

5.1-channel surround

Monaural and stereo use 1 channel and 2 channels respectively to

reproduce sound, but 5.1-channel surround uses 5 speakers and 1

subwoofer. The 5 channels are: 1 center speaker, 2 front speakers,

and 2 surround speakers at the side of or to the rear of the sitting

position. Sound output of the subwoofer is much narrower than the

other speakers, and so is considered as 0.1. This is called 5.1-channel

surround when played through all 5.1 channels, and with this system

you can achieve a similar effect with Dolby Virtual Speaker.

Panasonic SCHTX5 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCHTX5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info