Bedienungsanleitung Panasonic SCHTX500 (Seite 24 von 28) (Englisch)

618351

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

VQT2R75

Troubleshooting guide

Before requesting service, make the following checks.

If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the

problem, consult your dealer for instructions.

Problem Possible solution Pages

Common problems

No power. • Ensure the AC mains lead is connected. 11

No sound or image

after playback starts.

• Select the correct source.

• Turn the muting off.

• Check that the digital signals can be decoded by this system.

• Check if the cords and connectors are correctly connected to

speakers and other equipment.

• (When the audio is not heard from TV) The optical fibre

or stereo phono cable is necessary to connect with a TV

incompatible with ARC. For details, refer to the operating

instructions for the connected TV.

• Set “OFF ” for “Setting when the beginning of a CD track is cut ”.

• Turn this system off then on again.

• Output the test signals of speakers and adjust the speakers.

• If the connections are normal, this may be a cable-related

problem. Use other cables and make connections again.

11 to 13

—

Image distortion or

noise occurs.

• If your mobile phone has been put on the system or is being

used extremely close to it, keep enough distance in use.

• Check if the cable is connected properly.

—

11 to 13

The remote control

does not work.

• Replace the batteries if they are worn. 6

No sound from

microphone connected

to DVD player

(karaoke).

• No sound is output from microphone if this system is digitally-

connected with a DVD player. Make analogue connection.

There is no DTS audio

output.

• Set the digital audio output setting on the connected equipment

to Bitstream.

—

Sound is not heard

when playing DVD

audio.

• This may occur due to digital copyright protection of the disc if

using digital connection. This system may not be able to play

sources with sampling frequency of over 48 kHz.

—

Sound stops.

(“F61 ” appears on

the display for about 1

second.)

When this system detects

some abnormality, the

protection circuit is

activated and turns off the

system automatically.

• Amplifier output is abnormal.

• Straining of the speakers through excessive volume or power.

• This may occur if you use the system in an extremely hot

environment.

• Curtains or other objects may be blocking the exhaust hole.

D Determine and correct the cause, then turn the system on

again. (The protection circuit is reset.)

(Consult your dealer if the problem persists.)

—

“F70 ” appears

on the display.

(“DSP ”, “DAP ” or “HDMI ”

is displayed in  .)

• Turn off the system, unplug the AC mains lead, and consult

your dealer.

—

“F76 ” appears on the

display.

(After displayed, the

system turns off.)

• Unplug the AC mains lead, and consult your dealer.

—

Troubleshooting

and other

information

Troubleshooting guide

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCHTX500 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info