Bedienungsanleitung Panasonic SCPM38DB (Seite 16 von 20) (Englisch)

618439

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

ENGLISH

RQTX0190

Preparation

Ensure disc tray is empty.

Press and hold [CD q/h] on the main unit and then

press and hold [2] (or [1]) on the remote control.

“REMOTE 2” (or “REMOTE 1”) is displayed.

Devices which are defined as USB mass storage

class:

USB devices that support bulk only transfer.

USB devices that support USB 2.0 full speed.

•

Files must have the extension “.mp3” or “.MP3”.

The USB connectivity enables you to connect and play

MP3 tracks from USB mass storage class. Typically,

USB memory devices. (Bulk only transfer)

Preparation

Before connecting any USB mass storage device to

the unit, ensure that the data stored therein has been

backed up.

It is not recommended to use a USB extension

cable. The device connected via the cable will not be

recognised by this unit.

1 Reduce the volume and connect the USB mass

storage device.

2 Press [USB q/h] or [OK] to start play.

To Action

pause play

Press [USB q/h].

Press again to resume play.

stop play

Press [g].

“RESUME” is displayed. The position is

memorized.

Press [USB q/h] to resume.

Press [g] again to clear the position.

skip track

Press [w, q].

skip album

Press [e,r] in the play mode.

Press [e,r] once and then the numeric

buttons in the stop mode.

DEMO

VOLUME

OPEN/CLOSE

D.BASS

BASS

TREBLE

iPod

USB

DAB/FM

USB enabled device

(not included)

CBI (Control/Bulk/Interrupt) is not supported.

A device using NTFS file system is not supported

[Only FAT12/16/32 (File Allocation Table 12/16/32) file

system is supported].

Depending on the sector size, some files may not

work.

This unit can access up to 255 albums (including blank

folders) and 2500 tracks.

The maximum number of tracks in a folder are 999

tracks.

Only one memory card will be selected when

connecting a multiport USB card reader. Typically the

first memory card inserted.

Do not unplug the USB device during reading or

playback.

Disconnect the USB card reader from the unit when

you remove the memory card. Failure to do so may

cause malfunction to the device.

When you connect a compatible digital audio player

to the USB port, charging may be activated. It will not

charge when the unit is switched to standby mode or

iPod mode.

•

Press [DISPLAY] repeatedly during play or pause

mode.

Press and hold [OK] and [2] (or [1]) on the remote

control for at least 2 seconds.

If the remote control and main unit are using different

codes, a message appears on the main unit’s display

showing the main unit’s current code. Follow the above

step to change the remote control’s code to match it.

Change the code if you find the remote control

unintentionally also controls other equipment.

USB mass storage class device

Changing the remote control code

Change the main unit’s code

Change the remote control’s code

Compatible devices

Supported format

For other operating functions, they are similar to those

described in “Discs” (➡ page 7 and 8).

Note

Display function

Using other equipment (continued)

Elapsed play

time

Folder

name

Track

name

ID3 (Artist) ID3 (Track) ID3 (Album)

Remaining

play time

SC-PM42DBEB.indb 16 1/6/2010 10:14:58 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCPM38DB Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info