Bedienungsanleitung Panasonic SCPM39D (Seite 24 von 40) (Englisch)

618440

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Recording operations

RQT7509

Recording

OPEN

Types of tape which can be recorded correctly

Use normal position tapes.

High position and metal position tapes can be used, but the unit is not

able to record or erase them correctly.

Preparatory steps

Do these steps before each recording.

Wind up the leader tape so recording can begin immediately.

Volume, surround effects, sound field and quality

•

Recording level is set automatically.

•

The volume, sound field and quality have no effect on recording.

They can be adjusted for playback.

•

Multi-channel sources are automatically down-mixed to 2 channels

during recording.

Recording from an external unit

•

Do the preparatory steps. (A see above)

(For connections A page 32, Using an external unit)

1 Do step 1 (A page 32, Using an external unit—To playback).

2 Press [SHIFT] + [aREC] (main unit: [aREC]) to start

recording.

3 Start playback from the external source.

(For details, refer to the external unit’s instruction manual.)

Erasure prevention

Use a screwdriver or similar object to break out the tab.

To record on the tape again, cover the hole with adhesive tape.

Erase recordings

1. Press [- TAPE] and then [L STOP].

2. Press [SHIFT]+[aREC] (main unit: [aREC]).

Press to open and insert a cassette

Tape facing you (see

A page 23, Insert cassette) – make

sure that the cassette is fully inserted and close the lid by

hand.

Select the

disc.

Press to stop

playback.

Press to start

recording

(play starts).

Side A

Tab for side B

Tab for side A

Adhesive tape

To stop recording

Press [L STOP].

•

To record or erase the other side, turn the tape over.

Note

During recording, other buttons will not function except for [L STOP], [MUTING], [–, +, VOLUME], [J DISC PAUSE], [f] and [OPEN/CLOSE c]

buttons.

Recording from disc(s)

•

Do the preparatory steps (A see above).

•

Insert the disc(s) you want to record (A page 12, Discs—Basic

play).

STOP

DISC

ALL DISC

TAPE

REC

SHIFT

•

When recording stops, disc play stops automatically.

Recording specific disc(s) or tracks.

•

Do the preparatory steps (A see above).

1 Do steps 1 to 2 {A see above, Recording from disc(s)}.

To record programmed tracks

•

Do steps 1 to 3 {A page 15, Program play (up to 24 items)}.

2 Press [SHIFT] + [aREC] (main unit: [aREC]) to start

recording.

If the tape finishes before the disc

The disc continues playing. Stop it by pressing [L STOP].

Recording from the radio

•

Do the preparatory steps (A see above).

1 Tune to the desired station (A page 22, The radio).

2 Press [SHIFT] + [aREC] (main unit: [aREC]) to start

recording.

•

When recording an AM broadcast, sound is momentarily interrupted

when you start and stop the recording.

RQT7509_24 2/23/04, 1:41 PM24

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCPM39D Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCPM39D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info