Bedienungsanleitung Panasonic SCPM91D (Seite 24 von 36) (Englisch)

618451

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

RQT7937

Cassette tapes — Play and Recording

Recording

Types of tapes which can be recorded correctly

Use normal position tapes.

High position and metal position tapes can be used, but the unit will not

be able to record or erase them correctly.

Before recording

1. Wind up the leader tape so recording can begin immediately.

2. Press [PLAY MODE] to select the reverse mode.

One side only records.

/, $

Both sides record (forward reverse)

While recording, if a track is cut off in the middle at

the end of the front side, it is re-recorded from the

beginning on the reverse side.

At the end of the reverse side, recording stops and the

current track will be interrupted.

• “

$” automatically changes to “ /” when you start recording.

Volume, surround effects, sound ﬁeld and quality

• Recording level is set automatically.

• The volume, sound ﬁeld and quality have no effect on recording.

They can be adjusted for playback.

• Multi-channel sources are automatically down-mixed to 2 channels

during recording.

Recording from disc(s)

• Insert the cassette (➡ page 23)

• Insert the disc(s) you want to record

(➡ Discs—Basic play, page

12).

Select the

disc.

Press

to stop

playback.

Press to start

recording (play

starts).

Recording speciﬁc disc(s) or tracks

• Insert the cassette (➡ page 23)

1 Program the tracks (➡ page 15).

2 Press [SHIFT] + [*REC] (main unit: [*REC]) to start

recording.

If the tape ﬁnishes before the disc

The disc continues playing. Press [g, STOP] to stop it.

Recording from the radio

• Insert the cassette (➡ page 23)

1 Tune to the station (➡ The radio, page 22).

2 Press [SHIFT] + [*REC] (main unit: [*REC]) to start

recording.

• When recording an AM broadcast, sound is momentarily interrupted

when you start and stop the recording.

Recording from an external unit

For connections and operation, ➡ “Using an external unit”, page 30.

• Insert the cassette

(➡ page 23)

1 Press [TUNER/AUX] to select “AUX”.

2 Press [SHIFT] + [*REC] (main unit: [*REC]) to start

recording.

3 Start play on the external source.

(For details, refer to the external unit’s instruction manual.)

Erasure prevention

Use a screwdriver or similar object to break out the tab.

To record on the tape again, cover the hole with adhesive tape.

Erasing recordings

1. Press [TAPE w q] and then [g, STOP].

2. Press [SHIFT]+[

*REC] (main unit: [*REC]).

Disconnect the microphone.

To stop recording

Press [g, STOP].

When recording discs, the disc also stops.

Side A

Tab for side B Tab for side A

Adhesive tape

Your attention is drawn to the fact that

recording pre-recorded tapes or discs or other

published or broadcast material may infringe

For the United Kingdom and Continental Europe

For the Middle East and Southeast Asia

For Australia, N.Z., the Middle East and Southeast Asia

To record or erase the other side, turn the tape

over.

SC-PM91D EB.indd 24 3/18/2005 2:18:45 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCPM91D Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCPM91D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info