Bedienungsanleitung Panasonic SCPT175 (Seite 23 von 40) (Englisch)

618622

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

RQTX0246

Getting StartedPlaying DiscsOther OperationsReference

You can select whether audio is output from this unit’s

speakers or the TV speakers by using the TV menu settings.

For details, refer to the operating instructions for your TV.

Home Cinema

This unit’s speakers are active.

≥When you turn on this unit, this unit’s speakers will be

automatically activated.

≥When this unit is in standby mode, changing the TV

speakers to this unit’s speakers in the TV menu will

automatically turn this unit on and select “AUX”

“D-IN”

as the source.

≥The TV speakers are automatically muted.

≥You can control the volume setting using the volume or

mute button on the TV’s remote control. (The volume

level is displayed on this unit’s display.)

≥To cancel muting, you can also use this unit’s remote

control (B 38).

≥If you turn off this unit, TV speakers will be

automatically activated.

TV speakers are active.

≥The volume of this unit is set to “0”.

–This function works only when “DVD/CD”, “USB”,

“AUX”

or “D-IN”

is selected as the source on this

unit.

≥Audio output is 2-channel audio.

When switching between this unit speakers and TV

speakers, the TV screen may be blank for several seconds.

You can control the playback menus of this unit with the TV’s

remote control. When operating the TV’s remote control,

refer to the below illustration for operation buttons.

You can operate the playback with the indicated controls.

≥The on-screen control panel can also be shown by

using a button on the TV’s remote control (e.g.

[OPTION]).

–This works only during “DVD/CD” or “USB” playback

and resume modes.

If the TV has automatically switched to the HDMI input

mode for this unit (

22, Auto input switching

)

The TV will automatically switch to TV tuner mode when:

–you press [EXIT] button on the TV’s remote control.

–you press [EXIT] or [RETURN] button on the TV’s

remote control to exit the START menu.

This does not work during playback or resume mode when

“DVD/CD” or “USB” is selected as the source.

[Note]

≥Depending on the menu, some button operations

cannot be performed from the TV’s remote control.

≥You cannot input numbers with the numbered buttons

on the TV’s remote control ([0] to [9]). Use this unit’s

remote control to select the play list etc.

Speaker control VIERA Link Control only with TV’s remote control

(for “HDAVI Control 2 or later”)

1 Select this unit’s operation menu by using the TV menu

settings.

(For details, refer to the operating instructions for your

TV.)

The START menu will be shown.

e.g.

[DVD-V]

≥The START menu can also be shown by using a

button on the TV’s remote control (e.g. [OPTION]).

–When “DVD/CD” or “USB” is selected as the source,

the TV’s remote control works only during stop

mode.

2 Select the desired item on the START menu (B 13).

When the on-screen control panel appears

e.g.

[DVD-V]

(when “Playback Disc” is selected from the

START menu.)

DVD/CD Home Cinema

RETURN

Input Selection

Sound

Playback Disc

TOP MENU (DVD)

MENU (DVD)

Playback/menu access

SC-PT170-175EB-RQTX0246-B_eng.book Page 23 Wednesday, February 4, 2009 3:20 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCPT175 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCPT175

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info