Bedienungsanleitung Panasonic SCPT85 (Seite 11 von 94) (Englisch, Polnisch)

618629

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

RQTX1141

ENGLISH

Getting Started

≥ The following sound effects may not be available or may have no effect

with some sources.

≥

You may experience a reduction in sound quality when these sound effects

are used with some sources. If this occurs, turn the sound effects off.

Press [SURROUND]7.

Each time you press the button:

For “5.1ch layout”

mode

STANDARD:

Sound is output as it was recorded/encoded. Speaker output varies

depending on the source.

MULTI-CH:

You can enjoy sound from the front speakers, as well as the surround

speakers even when playing a 2-channel sound or non-surround sound.

MANUAL: (B below)

While “MANUAL” is displayed, press [2, 1]9 to select

other surround modes.

Each time you press [2, 1]9:

DOLBY PLII MOVIE

Suitable for movie software, or softwares recorded in Dolby Surround.

(except [DivX])

DOLBY PLII MUSIC

Adds 5.1-channel effects to stereo sources. (except [DivX])

S.SRD

You can enjoy sound from all speakers with stereo sources. (Surround

output will be in mono.)

STEREO

Sound will only be output to the front speakers and the subwoofer from

any source.

“SRD” lights in the main unit’s display when there is output from the

surround speakers.

For “2.1ch layout”

mode

STANDARD:

Sound is output as it was recorded/encoded. Speaker output varies

depending on the source.

STEREO:

You can play any source in stereo. Surround sound effect is

unavailable.

A.SRD:

You can enjoy surround effect with any audio source.

When the signal is DTS or Dolby Digital, “/DTS” or “/DOLBY DIGITAL” will

also be displayed respectively.

§ Selected mode in “Speakers position” (B 9, EASY SETUP settings).

Except [DivX]

You can enhance the surround effect for low volume 5.1-channel sound.

(Convenient for late night viewing.)

Press [W.SRD]<.

Each time you press the button:

WHISPER-MODE SRD ON,--.WHISPER-MODE SRD OFF

(Only when “5.1ch layout” mode is selected in “Speakers position” (B 9,

EASY SETUP settings).)

Preparation

≥ To display the picture, turn on the TV and select the appropriate video

input mode.

≥ Press [r, s VOL]> to adjust the volume to normal listening level.

≥ Select “TEST TONE” from “SPEAKER SETTINGS” in AUDIO menu

(B 18).

(Effective only when “5.1ch layout” mode is selected in “Speakers

position” (B 9, EASY SETUP settings) and playing 5.1-channel sound.)

Enjoying sound effects from all

speakers

Enjoying surround sound effects

Recommended modes to enjoy TV audio or stereo

sources from all speakers:

≥ DOLBY PLII MOVIE ≥DOLBY PLII MUSIC ≥ S.SRD

Selecting sound mode

Press [SOUND]B to select a sound mode.

Each time you press the button:

EQ: Equaliser

SUBW LVL: Subwoofer Level

C.FOCUS: Center Focus (Only when “5.1ch layout” mode is

selected in “Speakers position” (B 9, EASY SETUP

settings).)

While the selected mode is displayed, press [2, 1]9 to

make the settings.

Refer to the following for setting details of each sound effect.

Equaliser

You can select sound quality settings.

Each time you press [2, 1]9:

HEAVY: Adds punch to rock.

CLEAR: Clarifies higher sounds.

SOFT: For background music.

FLAT: Cancel (no effect is added).

Subwoofer level

You can adjust the amount of bass. The unit automatically selects

the most suitable setting according to the type of playback

source.

SUB W 1 ,# SUB W 2 ,# SUB W 3 ,# SUB W 4

^-------------------------------------------------------------------------------J

≥ The setting you make is retained and recalled every time you

play the same type of source.

Center Focus

(Effective when playing audio containing center channel

sound.)

You can make the sound of the center speaker seem like it is

coming from within the TV.

C.FOCUS ON,------.C.FOCUS OFF

Whisper-mode Surround

Adjusting the speaker output level manually

Press [OK]9 to enter test tone mode.

Test tone will be output to each channel in the following order.

LEFT, CENTER, RIGHT, SURROUND RIGHT, SURROUND LEFT

Press [OK]9 then [3, 4]9 to adjust the speaker level

for each speaker. (CENTER, SURROUND RIGHT,

SURROUND LEFT)

6dB to

6 dB (Factory preset: 0 dB)

≥ To exit the screen, press [SETUP];.

To adjust speaker level during play

1 Press and hold [–CH SELECT]; to select the speaker.

While the speaker channel is displayed, press [–CH SELECT];.

L# C# R# RS# LS# SW

^---------------------------------------------}

≥ You can adjust SW (Subwoofer) only if the disc includes a subwoofer

channel.

≥

“S” appears on the main unit’s display when you have selected “S.SRD”

(

B left

Enjoying surround sound effects

). In this case, you can adjust

both surround speaker levels at the same time using

[3, 4]9

S: `6dB to i6dB

2 Press [3]9 (increase) or [4]9 (decrease) to adjust the speaker

level for each speaker.

C, RS, LS, SW: `6dB to i6dB

(L, R: Only the balance is adjustable.) (B below)

Adjusting the balance of the front speakers

Press and hold [–CH SELECT]; to select “L” or “R”.

While “L” or “R” is selected, press [2, 1]9.

e.g.

AUDIO-SPEAKER SETTINGS-TEST TONE

SPEAKER

LEFT

CENTER

RIGHT

SURROUND RIGHT

SURROUND LEFT

TRIM LEVEL

− −

0dB

− −

0dB

SC-PT85EP-RQTX1141-Z_eng.book Page 11 Friday, January 8, 2010 3:40 PM

Panasonic SCPT85 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info