Bedienungsanleitung Panasonic SCVK450 (Seite 32 von 36) (Englisch)

618674

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

RQTV0128

LANG - 5 LANG - 4 FRANÇAIS DANSK ENGLISH

A-B repeat Page

Point B is automatically set.

• The end of an item becomes point B when it is reached.

Sound

Sound distorted.

• Noise may occur when playing WMA.

—

Effects do not work.

• Some audio effects do not work or have less effect with some discs.

• Advanced Surround does not work if you have changed the play speed.

—

Humming heard during play.

• An AC power supply cord or ﬂuorescent light is near the cables. Keep other

appliances and cords away from this unit’s cables.

—

No sound.

• There may be a pause in sound when you change the play speed.

• Audio may not be output due to how ﬁles are created.

DivX

Menus

The SETUP menu cannot be

accessed.

• Select “DVD/CD” as the source.

• Cancel program and random play.

—

Picture abnormal or un-viewable

Picture distorted.

• Some distortion is normal during SEARCH.

• Ensure that the unit is connected directly to the television, and is not connected

through a video cassette recorder.

• Change “Source Select” in Picture Menu.

DivX

Picture size doesn’t ﬁt the

screen.

• Change “TV Aspect” in the “Video” tab.

• Change the Zoom setting.

The television may display

incorrectly or colors appear

faded.

• The unit and television are using different video systems.

– Use a multi-system or NTSC television.

• The system used on the disc does not match your television.

– PAL discs cannot be correctly viewed on an NTSC television.

– This unit can convert NTSC signals to PAL 60 for viewing on a PAL television

(“NTSC Disc Output” in “Video” tab.)

—

Menu is not displayed

correctly.

• Restore the zoom ratio to “x1.00”.

• Set “Subtitle Position” in Display Menu to “0”.

Auto zoom function does

not work well.

• Turn off TV’s zoom function.

• Use the other preset aspect ratios or manual adjustment.

• Zoom function may not work well, especially in dark scenes and may not work

depending on the type of disc.

—

Progressive video

There is ghosting when

progressive output is on.

• This problem is caused by the editing method or material used on DVD-Video,

but should be corrected if you use interlace output. Change “Video Output

Mode” in Picture Menu to “480i (or 525i)” or “576i (or 625i)”.

Picture not in progressive

output.

• Select “480p (or 525p)” or “576p (or 625p)” in “Video Output Mode” in Picture

Menu.

• If the unit is connected to the television through VIDEO OUT or S VIDEO OUT

terminal, output will be interlace, even if “PRG” is displayed.

Listening to the radio

Noise is heard.

“ST” ﬂickers or doesn’t

light.

Sound is distorted.

• Adjust the position of the FM or AM antenna.

• Use an outdoor antenna.

• Press [PLAY MODE] to select “MONO”.

A beat sound is heard.

• Turn the television off or separate it from the unit.

—

A low hum is heard during

AM broadcasts.

• Separate the antenna from other cables and cords.

—

Troubleshooting guide (continued)

RQTV0128-2L_1En.indd 32 2/10/06 3:45:19 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCVK450 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info