Bedienungsanleitung Panasonic SCVK90D (Seite 40 von 44) (Englisch)

618693

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

RQT7125

Reference

Troubleshooting guide

Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not

solve the problem, consult your dealer for instructions.

Operation

No response when buttons

pressed.

No operations can be

performed with the remote

control.

Cannot switch on the television

with the remote control.

Play doesn’t start (or stops

immediately) when you press

[-/J DVD/CD] (remote

control: [- DVD/CD])

Cannot select alternative

languages.

No menu play.

No subtitles.

The position of the subtitles is

incorrect.

Soundtrack and/or subtitle

language is not the one

selected with the SETUP

menus.

Cannot change angle.

The SETUP menu cannot be

accessed.

Cannot add markers.

There are already markers.

RAM

Marker numbers I added are

different when I call them up.

RAM

Cannot select random or

program play.

Folders deeper than the eighth

layer on a data disc are not

displayed correctly.

You have forgotten your

ratings password.

Reset all the SETUP settings to

Factory Preset.

• Some operations may be prohibited by the disc. —

• The unit may not be operating properly due to lightning, static electricity or some other external —

factor.

Reset procedure:

Press [f/I] (remote control: [f]) to switch the unit to the standby mode and then back to ON.

Alternatively, press [f/I] (remote control: [f]) to switch the unit to the standby mode,

disconnect the AC power supply cord, and then reconnect it.

• Check that the batteries are installed correctly. 9

• The batteries are depleted: Replace them with new ones. 9

• Point the remote control at the remote control sensor and operate. —

• Press [SHIFT]+[TV f] first to operate the television. —

• Condensation has formed: Wait 1 to 2 hours for it to evaporate. —

• This unit cannot play discs other than the ones listed in these operating instructions. 5

• You can only play DVD-Video if their region number is the same or includes the same region Cover

number as the unit or if DVD-Video is marked “ALL”. Confirm the region number for the unit on

the rear panel.

• The disc may be dirty and may require cleaning. 5

• Ensure that the disc is installed with the label of the side to be played facing upwards. 14

• Check that the DVD-RAM has something recorded on it. —

• This function is dependent on software availability. —

• Try selecting from the disc’s menu if one is available. 14

• This function is dependent on software availability. —

• Subtitles are cleared from the television. Display the subtitles. 18

• Change the position of the subtitles with “Subtitle Position” in the GUI screen. 25

• This function is dependent on software availability. —

• This function is dependent on software availability. Even if a disc has a number of angles —

recorded, these angles may be recorded for specific scenes only.

• Select “DVD/CD” as the source. —

• Cancel all group, program and random play. 16

• You cannot add markers while playing a play list or if the disc’s play time doesn’t appear on the —

unit’s display.

• The unit reads and displays the markers added with a DVD video recorder. You can clear them —

but reappear when you switch the unit to standby, change the source, or change the disc.

• The unit numbers markers by time so they change when you add and delete them. —

• You cannot select random or program play with some DVD-Video. —

• Folders deeper than the eighth layer are displayed as the eighth layer. —

• While stopped and “DVD/CD” is the source, press and hold [L STOP] on the unit and [h10] on —

the remote control for about 3 seconds until “Initialized” disappears from the television. Turn

the unit off and on again.

All settings will return to the default values.

Power Page

No power.

The unit is automatically

switched to the standby mode.

• Insert the AC power supply cord securely. 9

• The unit was switched to standby by the sleep timer. 34

RQT7125(40-)-7 5/27/03, 3:05 PM40

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCVK90D Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info