Bedienungsanleitung Panasonic SCVK92D (Seite 32 von 36) (Englisch)

618696

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

RQT8169

Troubleshooting guide

Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do

not solve the problem, consult your dealer for instructions.

Unresponsive or inoperable function

No response when buttons

pressed.

No operations can be

performed with the remote

control.

Cannot play DVDs.

No picture or sound.

You have forgotten your

ratings password.

Reset all the settings to Factory

Preset.

• This unit cannot play discs other than the ones listed in these operating instructions. 4, 17

• Some operations may be prohibited by the disc. —

• The unit may not be operating properly due to lightning, static electricity or some other external —

factor. Turn the unit off then back to ON. Alternatively, turn the unit off, disconnect the AC power

supply cord, and then reconnect it.

• Condensation has formed: Wait 1 to 2 hours for it to evaporate. —

• Check that the batteries are installed correctly. 8

• The batteries are depleted: replace them with new ones. 8

• Aim the remote control at the remote control sensor and operate. 10

• CD Mode is on. Press [CD MODE] to turn CD Mode off. 14

• Check the video or audio connection. 6, 7

• Check the power or input setting of the connected equipment. —

• Check that the DVD-RAM has something recorded in it. —

• While stopped and “DVD/CD” is the source, press and hold [L STOP] on the main unit and —

[h10] on the remote control until “Initialized (or Initialised)” disappears from the television.

Turn the unit off and on again.

All settings will return to the default values.

Power Page

• Insert the AC power supply cord securely. 8

• The unit was switched to standby by the sleep timer or auto-off function. 28, 29

No power.

The unit is automatically

switched to the standby mode.

Specific operation undesirable or unexpected

It takes time before play starts.

MP3

Folders deeper than the eighth

layer on a data disc are not

displayed correctly.

WMA

MP3

JPEG

A menu screen appears during

skip or search.

VCD

Playback control menu doesn’t

appear.

VCD

with playback control

The program and random play

functions do not work.

DVD-V

Programmed items are not

played.

DVD-V

The on-screen menu shows

“2” as a soundtrack option

when [SHIFT]+[AUDIO] is

pressed, but the audio does not

change.

DVD-A

Play restarts from the

beginning of the track when the

soundtrack is changed.

DVD-A

Scenes are skipped

intermittently.

RAM

DVD-V

• Play may take time to begin when an MP3 track has still picture data. Even after the track starts, —

the correct play time will not be displayed. This is normal.

• Folders deeper than the eighth layer are displayed as the eighth layer. —

• This is normal for Video CDs. —

• Press [L] twice and then press [:, DVD/CD]. —

• These functions do not work with some DVD-Videos. —

• Some items cannot be played even if you have programmed them. —

• Even if a second soundtrack isn’t recorded, two numbers will normally be shown. —

• This is normal for DVD-Audio. —

• If you change the volume or sound field/quality setting during ADVANCED DISC REVIEW, the 14

function continues without the on-screen display. Press [A.DISC REVIEW] again to cancel the

function.

Subtitle

Subtitle position is wrong.

No subtitles.

• Adjust the position. (“Subtitle Position” in the Display Menu.) 19

• Display the subtitles. 15

Marker

Cannot add markers.

• You cannot add markers with DVD-RAM. —

• If the disc’s elapsed play time doesn’t appear on the unit’s display, you cannot add markers. —

A-B repeat

Point B is automatically set.

A-B repeat is automatically

canceled.

• The end of an item becomes point B when it is reached. —

• A-B repeat is canceled when you press [SHIFT]+[QUICK REPLAY]. —

Sound

Sound distorted.

Effects do not work.

Humming heard during play.

No sound.

• Noise may occur when playing WMA. —

• Some audio effects do not work or have less effect with some discs. —

• Multi Re-master and Dolby Pro Logic II do not work if you have changed the play speed. —

• An AC power supply cord or fluorescent light is near the cables. Keep other appliances and —

cords away from this unit’s cables.

• There may be a pause in sound when you change the play speed. 15

The Setup menu cannot be

accessed.

• Select “DVD/CD” as the source. —

• Cancel program and random play. 18

Menus

RQT8169(32_33)new 6/1/05, 8:40 AM32

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCVK92D Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info