Bedienungsanleitung Panasonic SLCT830 (Seite 4 von 4) (Englisch)

618919

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

MP3



You cannot select “RND” and “A



B” with MP3.

Handy functions

Playback modes

When the display is difficult to see...(Contrast adjustment)

(On the main unit)

Set the main unit to HOLD while stopped. While pressing and holding

[/], press [] (darker) or [] (lighter).

To see the display in the dark

Each time you change the position of the hold switch on the remote

control, the display will light for approx. 5 seconds.



If you select 3D-1 or 3D-2, the sound volume may be reduced.

The effect may differ with different kinds of music.

Depending on the recording conditions, sound may be interrupted

when switching between EQ settings.



If you select 3D-1 or 3D-2 then try playing a disc that contains both CD-ROM

format and CD-DA format tracks, there will be a brief noise when the disc

changes from playing the CD-ROM format track to the CD-DA format one.

If RMTR is set when playing MP3, the effect is canceled as soon as a

CD-DA format track is played.

MODE

RND

One track

repeat

All track

repeat

Random

repeat

No display (canceled)

AB repeat

(

below)

While playing

While paused

 “

” is displayed in place of anything over 32 characters.

 “_” is displayed in place of characters this unit cannot display.

 “

” appears if ID3 tags haven’t been entered.



MEMO/



DISP

RQT8183

Track title

ID3 track title

Track number and

elapsed play time

Album title

ID3 artist name

MP3

and

CD-DA

indicate

limitations on these discs only.

Changing the play mode

Changing the sound quality/sound effects

Changing the display

MP3



 

While stopped, tilt to select

the track number.





MEMO/



DISP

Press to enter.

Track number

ALBUM

Sequence number

Album number

MP3

Track

number Sequence

number

Will appear after

[



MEMO/



DISP]

is pressed

CD-DA



Repeat steps





to program up to 20 tracks.



Press to play.

Confirm tracks selected: While playing, press [



MEMO/



DISP].

Cancel: While playing, press [/] (Remote control)./

Press [] (Main unit).

(“M” disappears.)

Playing desired tracks only (Program play)

MODE

 To select another album (

page 3, Album skip)

 You cannot select album mode during program play (

above).

Each time you press and hold

No display

(canceled)

Album mode

(Only tracks on the desired

album are played)

H.BASS

H.BASST

S-XBS

S-XBST

TRAIN

Boosts the bass

Reduces sound leaks

and listening fatigue

Enhanced S-XBS

No display (Cancels the

sound quality)

Enhanced H.BASS

Add powerful bass

MP3

RMTR (Digital Re-master):

You can regenerate signal frequency

lost during compression, restoring the

sound to near pre-compression form.

While playing, each time

you press

While playing, each time

you press and hold

Changing the sound quality

Changing the sound effects

Sound field of 3D

3D-1

3D-2

RMTR

MP3

Enhanced 3D-1

More natural

sound quality

No display (Cancels the

sound effect)

The anti-skip function (ANTI-SKIP SYSTEM) reduces or eliminates skipping

caused by vibration. You can change the anti-skip memory time.



MEMO/



DISP

POS2

POS1

Anti-skip enhanced mode

Able to withstand a maximum of

45 seconds of vibration

Sound enhanced mode

Able to withstand a maximum of

10 seconds of vibration

MP3

You cannot change the memory time for MP3. It is a maximum

of 100 seconds for MP3 recorded at 128 kbps.

Changing the anti-skip mode

CD-DA

While stopped,

each time you press and hold

While playing, each time

you press and hold

Turn off this unit and the other equipment before connection.

Insert each plug fully. (Plug type: 3.5 mm stereo)

If you don’t want the remote control operation tone, turn it off (

page 3).

Each time you press

To CD or AUX

terminals

Audio system

and so on

Main unit

Remote

control

Audio cable (not included)

You cannot use an

optical cable.





Specifying the AB segment

Press to specify the start point (A).

Press once more to specify the end point (B).

 Stop or skip (

page 3) to cancel.

 If you do not specify point B this will automatically be set as the

end of the disc. Repeat begins when this point is reached. You can

also specify point B again by pressing [



MEMO/



DISP].



MEMO/



DISP

MP3

and

CD-DA

indicate

limitations on these discs only.

You can combine the sound quality and sound effects settings. Set the

sound quality by pressing [EQ] and then the sound effects by pressing

and holding [EQ]. (You can also set the sound effects first.)

When connecting the unit to other equipment, set the volume

level between 10 to 15, then use the volume control on the other

equipment to adjust the volume.

Connecting to other equipment

Playing only the tracks in a selected album

(Album mode)

MP3

(backward)

(forward)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SLCT830 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info