Bedienungsanleitung Panasonic SLPR300 (Seite 49 von 52) (Englisch)

618929

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

English

RQT6091

Troubleshooting

Before requesting service for this unit, check the chart below for a possible cause of the problem you are experiencing. Some simple checks or

a minor adjustment on your part may eliminate the problem and restore proper operation. If you are in doubt about some of the check points,

or if the remedies indicated in the chart do not solve the problem, refer to the directory of Authorized Service Centers (enclosed with this unit)

to locate a convenient service center, or consult your dealer for instructions.

If the unit fails to operate properly even when the remedial action suggested above has been taken:

This unit uses a microcomputer to perform a large number of operations. If it fails to operate no matter which button is pressed, disconnect the

power cord, and then wait a few moments before re-connecting it. Then set the time and re-program the timer.

Notes

• If something important is going to be recorded, always test-record first to check that the recording turns out properly before proceeding

with the actual recording.

• The manufacturer assumes no liability whatsoever for any damages resulting from missed opportunities or accidental erasure that occurs

while conducting recording or play operations due to malfunctioning of or trouble in the unit, or for any incidental damage.

Symptom Cause Remedial action/check Ref

COMMON

No sound. • A CD-R or CD-RW with nothing

recorded on it has been inserted.

(“BLANK DISC” is displayed.)

• Replace the disc with one on which

tracks have been recorded.

The time display flashes in the dis-

play window.

• A power failure has occurred or the

power cord has been disconnected.

• Set the clock and re-program the

timer.

CD PLAYER

Play fails to start • The CD has been inserted upside

down.

• Insert it properly with the label side

facing up.

• Condensation has formed on the

lens.

• Turn on the power and wait for a

couple of hours.

Specific parts are not played properly. • The CD is scratched. • Replace the CD. 14

CDR

Recording is not possible • The CD-R or CD-RW was loaded in

the tray upside-down.

• Load the disc with the label side up. 15

• The CD-R or CD-RW is already

finalized.

• Further recording on a finalized CD-

RW is only possible if the Unfinalize

function is used.

• Replace with a disc that can be

recorded on.

• The source being copied is already a

digital copy itself.

• Perform analog recording of the

source.

• There is dust or scratches on the sur-

face of the disc.

• Clean the disc using a commercially

available disc cleaner. If this is not

effective, replace the disc.

TIMER

Timer fails to start. • Present time is not correct.

• The timer display fails to appear.

• Set the time properly.

• Set the timer properly.

REMOTE CONTROL

No remote control operations. • The batteries in the remote control

have discharged.

• Replace them with two fresh batter-

ies (AA, R6, UM-3).

• The remote control sensor is

exposed to direct sunlight or some

other intense source of light.

• Move the unit so that the sensor is

not exposed to direct sunlight, a

lighting fixture or some other intense

source of light.

SL-PR300EB.fm Page 49 Thursday, September 27, 2001 7:54 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SLPR300 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info