Bedienungsanleitung Panasonic TCP50ST30 (Seite 41 von 72) (Englisch)

602336

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Advanced

Using Network services

Wireless network (Wireless network setting)

■Sets / Changes wireless network setting

Press “Wireless network” and display setting screen

Follow the directions on screen to complete the setting

Wireless network

WPS (Wi-Fi Protected Setup using push button)

Please choose connection method:

WPS (Wi-Fi Protected Setup using PIN number)

Search for wireless networks

Manual settings

select

* Wi-Fi Protected Setup is an easy setting of the Wi-Fi

Alliance’s certification

●

For more details on setting of an Access point, please

refer to operating manual for the Access point.

Search for Wireless networks:

Select an Access point from the ones searched for

automatically, and configure the settings as instructed

on the screen.

WPS (Wi-Fi Protected Setup* using push button):

You can connect the Access point to press the

buttons.

WPS (Wi-Fi Protected Setup using PIN number):

Set the PIN code that is displayed on the TV on the

Access point.

Manual settings:

Manually set SSID, Security type, and Encryption type

to match the settings of the Access point to which to

connect.

●

When connecting by 11n (5 GHz), select “AES” as the

Encryption type for the wireless LAN.

IP address/DNS settings

Select “IP/DNS setting mode” and set to

“Automatic”

(When IP/DNS automatic acquisition in DHCP can be

used)

IP address/DNS settings

IP setting mode

IP address 192.168.0.5

Subnet mask 255.255.255.0

Default gateway 192.168.0.254

DNS setting mode Automatic

DNS 192.168.0.20

Automatic

The acquired address is displayed.

select

Each IP address is acquired automatically

If you are using a broadband router, IP automatic

acquisition in DHCP can be used under normal

circumstances. If you are not sure, check with the person

who installed the equipment, or check the instructions for

each device.

■Manual setting

Select “IP/DNS setting mode” and set to “Manual”

Select the item and press OK

Check the specifications of the broadband router and

enter each IP address.

Or Enter each IP address as was specified by the

provider

IP address

0 . 0 . 0 . 0

Proxy setting

Set only if specified by the provider. It is not required for normal household use.

Select “Proxy setting”

IP address/DNS settings

IP setting mode

IP address 192.168.0.5

Subnet mask 255.255.255.0

Default gateway 192.168.0.254

DNS setting mode Automatic

DNS 192.168.0.20

Proxy setting

Automatic

select

Select item and press OK

select

Proxy setting

Proxy address

Proxy port

Enter address or port number and press OK

●

Entering characters (p. 21)

■Proxy address

This is the address of the relay server that is connected

to the target server instead of the browser and sends

data to the browser. Setting is only required if specified

by the provider.

■Proxy port

This number is specified by the provider together with the

Proxy address.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic TCP50ST30 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info