Bedienungsanleitung Panasonic th-42pd60e (Seite 19 von 20) (Englisch)

141346

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

FAQs, etc.

IDTV

FAQs

Before requesting service or assistance, please follow these simple guides to resolve the problem.

If problem still persists, please contact your local Panasonic dealer or Panasonic Customer Care Centre

for assistance.

White spots or

shadow images

(noise)

•

Check the position, direction,

and connection of the aerial.

No DVB

programmes shown

after Auto Setup

•

Check the DVB transmitter.

•

Adjust the direction of the aerial

to another transmitter installed

nearby.

•

Check the analogue broadcast.

If the image quality is poor,

check the aerial and consult

your nearest dealer.

Interference or

frozen / disappearing

image in DVB

•

Check "Signal Condition". (p. 25)

If "Signal Quality" or "Signal

Strength" are displayed in red

check aerial.

If problem persists consult your

local Panasonic dealer.

•

Turn the TV unit off with the On /

Off switch, then turn it on again.

Pictures from an

equipment are unusual

when the equipment is

connected via HDMI

•

Is the HDMI cable connected properly?

(p. 30)

•

Turn Off the TV unit and equipment,

then turn them On again.

•

Check an input signal from the equipment.

(p. 35)

•

Use an equipment compliant with

EIA/CEA-861/861B.

The remote control

does not work

•

Are the batteries installed correctly?

(p. 6)

•

Has the TV unit been switched On?

Problem Actions

logo appears at

the four corners of the

screen

Screen

Contrast is reduced

Only one part

remains dark

Chaotic image, noisy

No image can be

displayed

Blurry or

distorted image

(no sound or low volume)

Neither image nor

sound is produced

•

The function to prevent after-image is activated.

(Not a faulty symptom)

● The screen saver is activated if the TV unit is not

operated for a certain time in AV mode.

● Contrast is lowered when radio, menu, etc. lasts for

several minutes.

● "after-image" (p. 5)

•

A pixel or luminescent spot may occasionally be missing

in plasma displays.

(Not a faulty symptom)

•

Set "P-NR" in the Picture menu (to remove noise).

(p. 16)

•

Check nearby electrical products

(car, motorcycle, ﬂuorescent lamp).

•

Is "Colour" or "Contrast" in the Picture menu set to the

minimum? (p. 16)

•

Reset channels. (pp. 20 and 24)

•

Some programmes may not be received when both Aerial

and CATV signals are connected to the TV through a

mixer. In this case, connect either Aerial or CATV signal

directly to the TV.

•

Is the unit in "AV mode"?

•

Is the mains lead plugged into the socket outlet?

•

Is the TV unit turned On?

•

Check Picture menu (p. 16) and volume.

•

Frequently Asked Questions

To customer using indoor aerial

In order to enjoy a good quality DVB image, it is

important to receive a good quality DVB signal. For

this purpose check "Signal Condition" in Tuning

Menu (p. 25). A level of at least 5 is required in order

to provide a good picture. It may be necessary to

adjust the position and direction of the aerial to

achieve the best possible result.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic th-42pd60e Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic th-42pd60e

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info