Bedienungsanleitung Panasonic TH-42PH10ES (Seite 5 von 56) (Englisch)

453827

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Safety Precautions

Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table

cloths and curtains.

For sufﬁ cient ventilation;

If using the pedestal (optional accessory) for the Plasma Display, leave a space of at least 10 cm at the top,

left and right, at least 6 cm at the bottom, and at least 7 cm at the rear. If using some other setting-up method,

leave a space of at least 10 cm at the top, bottom, left and right, and at least 7 cm at the rear.

When using the Plasma Display

The Plasma Display is designed to operate on 220 - 240 V AC, 50/60 Hz.

Do not cover the ventilation holes.

• Doing so may cause the Plasma Display to overheat, which can cause ﬁ re or damage to the Plasma Display.

Do not stick any foreign objects into the Plasma Display.

• Do not insert any metal or ﬂ ammable objects into the ventilations holes or drop them onto the Plasma Display, as

doing so can cause ﬁ re or electric shock.

Do not remove the cover or modify it in any way.

• High voltages which can cause severe electric shocks are present inside the Plasma Display. For any inspection,

adjustment and repair work, please contact your local Panasonic dealer.

Ensure that the mains plug is easily accessible.

An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective earthing

connection.

Do not use any power supply cord other than that provided with this unit.

• Doing so may cause ﬁ re or electric shocks.

Securely insert the power supply plug as far as it will go.

• If the plug is not fully inserted, heat may be generated which could cause ﬁ re. If the plug is damaged or the wall

socket is loose, they shall not be used.

Do not handle the power supply plug with wet hands.

• Doing so may cause electric shocks.

Do not do anything that may damage the power cable. When disconnecting the power cable, pull on the plug

body, not the cable.

• Do not damage the cable, make any modiﬁ cations to it, place heavy objects on top of it, heat it, place it near any

hot objects, twist it, bend it excessively or pull it. To do so may cause ﬁ re and electric shock. If the power cable is

damaged, have it repaired at your local Panasonic dealer.

If the Plasma Display is not going to be used for any prolonged length of time, unplug the power supply plug

from the wall outlet.

If problems occur during use

If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odour starts to come out

from the Plasma Display, immediately unplug the power supply plug from the wall outlet.

• If you continue to use the Plasma Display in this condition, ﬁ re or electric shock could result. After checking that

the smoke has stopped, contact your local Panasonic dealer so that the necessary repairs can be made. Repairing

the Plasma Display yourself is extremely dangerous, and shall never be done.

If water or foreign objects get inside the Plasma Display, if the Plasma Display is dropped, or if the cabinet

becomes damages, disconnect the power supply plug immediately.

• A short circuit may occur, which could cause ﬁ re. Contact your local Panasonic dealer for any repairs that need to

be made.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic TH-42PH10ES Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic TH-42PH10ES

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info