Bedienungsanleitung Panasonic TH-42PH10ES (Seite 42 von 56) (Englisch)

453827

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

1/3

Options

Off-timer function

INPUT lock

Studio W/B

Advanced PIP

Display size

Initial VOL level

Maximum VOL level

Initial INPUT

Onscreen display

Off

Enable

Off

Options Adjustments

Item Effect Adjustments

Initial VOL

level

Off On

Press button to adjust the volume when the unit is turned on.

Off On

Off: Sets normal volume.

On: Sets your preferred volume.

Notes:

•

When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximum range.

•

You can hear the changed volume regardless of your volume setting before opening the options menu if

you adjust the volume when “Initial VOL level” is “On” and cursor is on the menu.

Maximum VOL

level

Off On

Press button to adjust the maximum volume.

Off On

Off: Sets auto maximum volume.

On: Sets your preferred maximum volume.

Notes:

• If the “Maximum VOL level” is set lower than the “Initial VOL level”, the “Initial VOL level”

automatically becomes the same as the “Maximum VOL level”.

• The volume display can go up to 63 regardless of the settings.

•

You can hear the changed volume regardless of your volume setting before opening the options menu if

you adjust the volume when “Maximum VOL level” is “On” and cursor is on the menu.

INPUT lock

Off PC INPUT1 INPUT2 INPUT3

Locks the input switch operation.

Notes:

• Only the adjusted signal is displayed (see page 13).

• Signal can be displayed when the Terminal board is installed.

• Input switch can be used when this is set to “Off”.

• In two screen display mode, if anything other than “Off” is set, the value will be ﬁ xed as the value

input in the single screen display mode.

• When a dual input terminal board is attached, A or B is displayed depending on the selected

input signal. (Ex. INPUT1A, INPUT1B)

Studio W/B

Off On

Off: Nullify all the settings adjusted.

On: Sets the colour temperature for TV studio.

Note: Valid only when the low is set as colour temperature on screen adjustment.

Advanced PIP

Off On

Off: Sets normal two screen display mode (see page 20).

On: Sets Advanced PIP mode (see page 21).

Notes:

• When “INPUT lock” is “On”, you cannot use all the two screen display functions.

•

, buttons are unavailable during Advanced PIP mode operation.

Display size

Off On

Adjusts the image display size on screen.

Off: Sets the normal image display size on screen.

On: Sets the image display size approximately 95 % of the normal image display.

Off On

Notes:

• This setting is valid only when the input signals are as follows; 525i, 525p, 625i, 625p, 750/60p,

750/50p, 1125/60i, 1125/50i, 1125/24sF, 1125/25p, 1125/24p, 1125/30p, 1250/50i (Component

Video, RGB, DVI, SDI, HDMI)

• This setting is invalid when two screen display, digital zoom or Multi screen is selected.

• When “Display size” is set to “On”, Pos. /Size adjustment cannot be used.

• Refer to each board’s operating instruction for DVI, SDI, HDMI’s corresponding signals.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic TH-42PH10ES Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic TH-42PH10ES

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info