Bedienungsanleitung Panasonic TH-46PZ81 (Seite 35 von 68) (Englisch)

64912

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Advanced

•

Advanced Settings

(freesat)

Connect

to the

Broadband

network

Network

Setup

Satellite Signal Condition

Satellite Programme 101 BBC 1 Scotland

Signal Quality

Signal Strength

Network ID

Transport Stream ID

Satellite Lock Indicator

003B

07FF

Not Locked

Selects a programme and checks the freesat signal condition.

•

To change the programme

A good Signal Strength is not an indication of

suitable signal for freesat reception. Please

use the Signal Quality indicator as follows:

Signal Quality:

•

Green bar Good

•

Yellow bar Poor

•

Red bar Bad (Check the Satellite dish)

Check

freesat

signal

Signal

Condition

Sets the network settings for future applications from broadcasters to enable greater

interactivity and added features for freesat services.

•

To connect to your network p. 56 and p. 60

■ Connect to network

Performs automatic testing of the network connection for the TV.

Set the network setting items see below

Select “Connect to network” and access to test

•

It takes a while to test.

access

select

Connected

The test is successful and the network settings become effective.

Not connected

Check the settings and connections, and then perform this function again.

■ Acquire IP address

■ Acquire DNS address

Sets IP address, Subnet mask, Gateway, Primary DNS and Secondary DNS.

For most users, the recommended method of connection to your network is by using Auto feature.

Select “Acquire IP address” and then set to “Auto”

Select “Acquire DNS address” and then set to “Auto”

•

The available settings are displayed automatically.

set

select

Manual settings

If you wish to set these functions manually, select “Manual”.

Select “IP address”, “Subnet

mask”, “Gateway”, “Primary DNS”

or “Secondary DNS”

Move the cursor and enter the

number

select

move

■ Proxy

Sets Proxy address.

•

This is the address of the relay server that is connected to the target server instead

of the browser and sends data to the browser. Setting is required if speciﬁ ed by the

provider.

Select “Proxy” Enter the address

access

select

Proxy

Host http://

ABCDEFGH I JKLMN

UVWXYZ 0123456

abcde f gh i j k lmn

uvwxyz( )+- .*_

OPQRST

789 ! :#

opqr s t

Set characters Store

set

select

RETURN

■ Proxy port

Sets Proxy port number.

•

This number is also speciﬁ ed by the provider with the Proxy address.

Select “Proxy port” Move the cursor and enter the number

select

move

■ Speed mode (Auto / 10base half / 10base duplex / 100base half / 100base duplex)

Sets the LAN speed setting.

•

Set to “Auto” normally.

•

If “Connect to network” test fails, try the other speed modes.

Select “Speed mode” and then set the speed mode

set

select

■ MAC address

MAC address is a unique address that identiﬁ es hardware in the network. (for information only)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic TH-46PZ81 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info