Bedienungsanleitung Panasonic TH152UX1 (Seite 43 von 56) (Englisch)

602344

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

• 24p SMOOTH FILM

During 2D or 3D viewing, images captured at 24

frames per second are provided in a smooth manner.

Off

Note:

This function can be set only for 24p signal input with 2D

or 3D images

• 3D 24p Film Display

For 3D images, images captured at 24 frames per second are set.

60Hz 48Hz

60Hz: Increases the number of frames to reproduce

more natural movement images.

48Hz: Reproduces images like ﬁ lm-speciﬁ c.

Note:

This function can be set only for 24p signal input with 3D images.

Setup menu

Function selection

Negative image : Negative image will be displayed on the screen.

Scrolling bar only :

A white bar will scroll from left to right. The image won't be displayed.

Overlay scrolling bar :

The brightness of the image will be decreased and a white bar will scroll on it.

White screen : The whole screen will be white.

Note:

When the input signal is a 4k2k signal, only “Scrolling bar only” and “White screen” can be selected.

Start setting

Select “Start”.

Screensaver

Start

Function

Negative image

Screensaver

Start

Function

Negative image

3D Settings

Screensaver

Extended life settings

Input label

Off

PC Power management

Off

Auto power off

Off

OSD Language

English

(

)

Power save

Setup

Signal

Screensaver

Do not display a still picture, especially in 4:3 mode, for any length of time.

If the display must remain on, a Screensaver should be used.

Screensaver

Start

Function

Negative image

access

select

Scrolling bar only

Overlay scrolling bar

Negative image

White screen

change

select

The menu screen will disappear and the

SCREENSAVER will be activated. To stop the

Screensaver under On, press any button.

Note: When the display is turned off, the

Scrensaver will be deactivated.

set

select

• HDMI Range

Switches the dynamic range according to the input signal from HDMI 1 and HDMI 2 terminals.

Video(16-235) Full(0-255) Auto

Video(16-235): If the input signal is the video range, Example: HDMI terminal output for DVD player

Full(0-255): If the input signal is full range, Example: HDMI terminal output for personal computer

Auto:

Switches the dynamic range automatically between “Video(16-235)” and “Full(0-255)” according to the input signal.

Note:

This function can be set only for HDMI 1 and HDMI 2 terminal input.

• SDI Signal Format

Enabled only when the signal is input to the 4K SDI IN terminal.

Selects the format of the input signal for the 4K SDI IN terminal.

For 3,840/30p or 3,840/24p signal input:

Auto YCbCr(4:4:4) 10bit RGB(4:4:4) 10bit YCbCr(4:2:2) 12bit YCbCr(4:4:4) 12bit

RGB(4:4:4) 12bit

For 4,096/24p signal input:

Auto RGB(4:4:4) 12bit XYZ(4:4:4) 12bit

Auto: Automatically selects the signal format according to the input signal.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic TH152UX1 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic TH152UX1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info