Bedienungsanleitung Panasonic TH152UX1W (Seite 51 von 56) (Englisch)

602345

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Troubleshooting

Before you call for service, determine the symptoms and make a few simple checks as shown below.

Symptoms Checks

Interference

Electrical Appliances

Cars / Motorcycles

Fluorescent light

No Picture

The breaker is turned off.

Not switched on

Picture and Brightness setting

(Check by pressing button on the remote control.)

If a signal with a non-applicable colour system format, or frequency is input, only

the input terminal indication is displayed.

No Colour

Colour controls set at minimum level

(see page 25, 26)

No remote control operations can be performed. Check whether the batteries have discharged completely and, if they have not,

whether they were inserted properly.

Check whether the remote control sensor is exposed to an outdoor light or a

strong ﬂ uorescent light.

Check whether the remote control designed speciﬁ cally for use with the unit is

being used. (The unit cannot be operated by any other remote control.)

A cracking sound is sometimes heard from the unit.

If there is nothing wrong with the picture, this is the sound of the cabinet undergoing

very slight contractions in response to changes in the room temperature. There are

no adverse effects on the performance or other aspects.

The top or bottom of the picture on the screen is cut

off when I use the zoom function.

Adjust the position of the picture on the screen.

Areas at the top and bottom of the screen where

the image is missing appear when I use the zoom

function.

When using a video software program (such as a cinema size program) with a

screen wider than one in the 16:9 mode, blank areas separate from the images

are formed at the top and bottom of the screen.

I can hear sounds coming from inside the unit. When the power is turned on, a sound of the display panel being driven may be

heard: This is normal and not indicative of malfunctioning.

Parts of the unit become hot.

Even when the temperature of parts of the front, top and rear panels has risen, these

temperature rises will not pose any problems in terms of performance or quality.

Power automatically turns off unexpectedly. Check the settings of “PC Power management” and “Auto power off” in the Setup

menu. Any of them may be set to “On”. (see page 34)

Power indicator is blinking in red. There is possibility of malfunction. Please contact an Authorized Service

Center.

This Plasma Display uses special image processing. Hence a slight time lag may occur between image, depending on the type of input

signal. However, this is not a malfunction.

Plasma Display panel

Symptoms Check

The screen darkens slightly

when bright pictures with minimal

movements are shown.

The screen will darken slightly when photos, still images of a computer or other pictures with minimal

movements are shown for an extended period. This is done to reduce image retention on the screen

and the shortening of the screen’s service life: It is normal and not indicative of malfunctioning.

It takes a while for the picture

to appear.

The unit digitally processes the various signals in order to reproduce esthetically pleasing images. As

such, it sometimes takes a few moments for the picture to appear when the power has been turned

on, when the input has been switched or when the images for the main picture and sub picture on

the two screens are swapped.

The edges of the images

ﬂ icker.

Due to the characteristics of the system used to drive the panel, the edges may appear to ﬂ icker in

the fast-moving parts of the images: This is normal and not indicative of malfunctioning.

The brightness on both sides of

images in the 4:3 mode changes.

When viewing the side panels at the “High” or “Mid” setting, the brightness on both sides may change

depending on the kind of program shown: This is normal and not indicative of malfunctioning.

Some parts of the screen do

not light up.

The plasma display panel is manufactured using an extremely high level of precision technology,

however, sometimes some parts of the screen may be missing picture elements or have luminous

spots. This is not a malfunction.

Image retention appears

Do not allow a still picture to be displayed for an extended period, as this can cause a permanent image retention to

remain on the Plasma Display.

Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3 mode.

Note:

The permanent image retention on the Plasma Display resulting from ﬁ xed image use is not an

operating defect and as such is not covered by the Warranty.

This product is not designed to display ﬁ xed images for extended periods of time.

Whirring sounds can be heard

from the display unit.

The display unit is ﬁ tted with a cooling fan to dissipate heat generated during normal use. The whirring

sound is caused by rotation of the fan and is not a malfunction.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic TH152UX1W Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic TH152UX1W

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info