Bedienungsanleitung Panasonic TH37PA20B (Seite 26 von 52) (Englisch)

602347

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Aspect Controls

Press the ASPECT

ASPECT

to move through the seven aspect options: Panasonic Auto, 16:9, 14:9, 4:3, Zoom1,

Zoom2 and Zoom3.

Notes:

• If, in Panasonic Auto mode, you experience problems with the screen

display size when playing back widescreen format recordings from your

VCR then it is possible that the tracking control on your VCR requires

adjustment (your VCR instruction book will contain adjustment details).

• The widescreen aspect ratios of different films and programmes can vary.

If these are wider than a standard 16:9 aspect picture then a black band

may be visible at the top and bottom of the screen.

Panasonic Auto

Panasonic Auto determines the best aspect ratio to display the picture

you are viewing. It does this using a four step process to determine if the

picture being viewed is a widescreen picture.

If Panasonic Auto detects a widescreen signal it switches into the

appropriate widescreen mode. The Panorama (Just) mode is selected if a

signal with wide aspect ratio is not present (the screen cannot be switched

from Panorama mode into 4:3 mode).

The text shown on the screen indicates how Panasonic Auto determined

which ratio to use:

When in Panasonic Auto mode, if a Letter box signal is input and there is no

Aspect information, the picture is automatically adjusted to Just, Zoom1 or

Zoom3.

Panasonic Auto

WIDE

Panasonic Auto

‘WIDE’ appears in the top left

of the screen, Panasonic Auto

switches to the appropriate

16:9 or 14:9 widescreen ratio.

‘Panasonic Auto’ appears in the

top left of the screen. The best

ratio is chosen and the picture

expanded to fill the screen.

Notes:

• If you leave Aspect set to Panasonic Auto, this set software determines the best ratio for each programme viewed.

In order not to disrupt your viewing, no mode information is displayed while this is happening.

Simply press the ASPECT button to display mode information in the top left of the screen.

• The screen modes (16:9/14:9/4:3/Zoom1/Zoom2/Zoom3) are selectable manually.

• During Aspect change, the displayed picture will momentarily disappear. This is not a malfunction.

The on screen selector buttons (corresponding to the two coloured buttons on

the remote control) will appear for some Aspect functions and disappear after a

few seconds, if you’d like to select an operation when the buttons are not shown,

press the ASPECT

ASPECT

button once more and the buttons will reappear.

16 : 9

<< >>

‘WIDE’ appears in the top left of the screen if a widescreen identification signal (WSS) is found or a signal is found

through a Scart socket.

Panasonic Auto switches to the appropriate 16:9 or 14:9 widescreen ratio.

‘Panasonic Auto’ appears in the top left of the screen if black stripes above and below the picture are detected.

Panasonic Auto chooses the best ratio and expands the picture to fill the screen. This process can take several

minutes, depending on how dark the picture is.

Screen mode

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic TH37PA20B Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info