Bedienungsanleitung Panasonic TH37PR10E (Seite 35 von 48) (Englisch)

602369

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Options

Weekly Command Timer

Onscreen display

Off

Initial INPUT

1/3

Maximum VOL level

Initial VOL level

Button lock

INPUT lock

Advanced PIP

Remocon User level

Off

Item Effect Adjustments

Initial VOL

level

Off On

Press button to adjust the volume when the unit is turned on.

Off On

Off: Sets normal volume.

On: Sets your preferred volume.

Notes:

•

When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximum range.

•

You can hear the changed volume regardless of your volume setting before opening the options menu if you

adjust the volume when “Initial VOL level” is “On” and cursor is on the menu.

Maximum VOL

level

Off On

Press button to adjust the maximum volume.

Off On

Off: Sets auto maximum volume.

On: Sets your preferred maximum volume.

Notes:

• If the “Maximum VOL level” is set lower than the “Initial VOL level”, the “Initial VOL level”

automatically becomes the same as the “Maximum VOL level”.

• The volume display can go up to 63 regardless of the settings.

•

You can hear the changed volume regardless of your volume setting before opening the options menu if you

adjust the volume when “Maximum VOL level” is “On” and cursor is on the menu.

INPUT lock

Off PC INPUT1 INPUT2 INPUT3

Locks the input switch operation.

Notes:

• Only the adjusted signal is displayed (see page 16).

• Signal can be displayed when the Terminal board is installed.

• Input switch can be used when this is set to “Off”.

• In two screen display mode, if anything other than “Off” is set, the value will be ﬁ xed as the value

input in the single screen display mode.

• When a dual input terminal board is attached, A or B is displayed depending on the selected input

signal. (Ex. INPUT1A, INPUT1B)

Button lock

Off MENU&ENTER On

Off: All the buttons at the bottom of the main unit can be used.

MENU & ENTER:

Locks

and

ENTER/

buttons on bottom face of main unit.

On: Locks all the button on bottom face of main unit.

Sets Button lock with the unit buttons in the following procedure.

Off: Press

four times→Press

INPUT

four times→Press four times→Press

ENTER/

MENU & ENTER

: Press

ENTER/

four times→Press four times→Press

INPUT

four times→Press

ENTER/

On: Press four times→Press

ENTER/

four times→Press four times→Press

ENTER/

Remocon

User level

Off User1 User2 User3

Off: You can use all of the buttons on the remote control.

User1:

You can only use , , , , , , , buttons on the remote

control.

User2:

You can only use

, , buttons on the remote control.

User3:

Locks all the buttons on remote control.

Advanced PIP

Off On

Off: Sets normal two screen display mode (see page 19).

On: Sets Advanced PIP mode (see page 20).

Notes:

• When “INPUT lock” is “On”, you cannot use all the two screen display functions.

•

, buttons are unavailable during Advanced PIP mode operation.

Options Adjustments

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic TH37PR10E Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic TH37PR10E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info