Bedienungsanleitung Panasonic TH42PE40B (Seite 34 von 48) (Englisch)

602596

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Q-Link

Q-Link allows the television to communicate with a compatible VCR or DVD Recorder.

For Q-Link communication to work, the TV must be connected to a recording device with the “Q-Link”, “NEXTVIEWLINK”,

“DATA LOGIC”, “Easy Link”, “Megalogic” or “SMARTLINK” logo using a “fully wired” Scart cable between the AV2 / AV3

terminal of the television and the appropriate terminal on your VCR or DVD Recorder. See page 15 for details of Q-Link

terminal setup. This television does not support any other types of recording control signal.

For connection to the appropriate Scart terminal on the recording device, refer to the device’s instruction book.

When using a “NEXTVIEWLINK” device the main features possible are the following :

Preset Download

This allows the programme order from the TV to be downloaded to the recording device, helping to ensure that correct

recordings are made; there are several ways to perform this operation :

1. During installation as explained in the “Quick Start Guide” on page 8-10.

2. When Auto setup is started from within the Tuning menu. See page 16.

3. Preset download started from the recording device, refer to the device’s instruction book.

Because a recording device cannot tune to DVB stations, only the analogue programme positions are downloaded to the device.

Recording in progress No recording -Check tape or disc

The recording device is recording the programme signal

from its own tuner. If you wish you can switch off the TV

and leave the device recording in the normal way.

The tape or disc may have been “write protected”, missing

or may be damaged. The device may already be recording.

Refer to the device’s instruction book.

Recording DVB stations

If you press the DIRECT TV REC button while watching a DVB station, the recording device will automatically switch to its

AV input to record the DVB signal from the TV (via the SCART cable), and the DVB programme position will be locked. If

you attempt to select another DVB programme position while recording, you will see the message “DVB Tuner Locked”.

Press the OK button to clear the message, or the EXIT button to unlock the programme. Beware that if you press EXIT,

the DVB programme will be unlocked – switching to another DVB programme will spoil your intended recording. Stop the

recording manually.

Additionally, when using a “Q-Link” device the following main features are possible:

The following features are only available from the device connected to the Scart terminal selected using “Q-Link”. See

page 15.

TV / Recording device Auto Power On

If you insert pre-recorded media into the recording device and press the Play button whilst the TV is in Standby mode, the

TV will automatically switch on and select the correct AV input so that you can view the content.

Recording device Auto Power Standby

When the TV is switched into Standby mode, the recording device will also switch into Standby mode if there is no media

inserted, or if there is media inserted and the device is in Rewind or Stop mode. If a VCR is rewinding a tape, it will not

switch into Standby mode until rewinding has finished.

Recording device Image View On

If the TV is in Standby mode and the recording device sends a menu to be displayed on the TV screen (e.g., Main menu),

the TV will automatically switch On and the menu will be displayed.

This TV will also communicate with other recording device’s that bear the following logos :

• “DATA LOGIC” (a trademark of Metz Corporation) • “Megalogic” (a trademark of Grundig Corporation)

• “Easy Link” (a trademark of Philips Corporation) • “SMARTLINK” (a trademark of Sony Corporation)

Important Note:

Some recording devices may not support all or some of the above functions. Refer to the instruction book for the device.

If Q-Link functions do not work, check the connection and ensure that the scart lead is a fully-wired type.

What You See Is What You Record (DIRECT TV RECORDING)

This will allow the immediate recording of the programme currently shown on the TV, by the recording

device attached to the Scart terminal, which can be chosen using “Q-Link”. See page 15.

Press the DIRECT TV REC button.

DIRECT

TV REC

If the recording device is in Standby mode with usable recording media inserted, it will automatically switch

on when you press the DIRECT TV REC button.

If a “Q-Link” device is connected, a message will appear on the TV screen showing what is being recorded,

or if it is not possible to record. Some “Q-Link” compatible devices will only display the message when on

the VCR programme position(0) or in AV mode. Refer to the device’s instruction book.

123

456

789

MODE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic TH42PE40B Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic TH42PE40B

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info