Bedienungsanleitung Panasonic TH42PF20E (Seite 54 von 70) (Englisch)

602600

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

Options Adjustments

Item Adjustments

Input lock

Locks the input switch operation.

Off

PC SLOT INPUT*

VIDEO COMPONENT*

HDMI DVI

*1 “SLOT INPUT” is displayed when an optional Terminal Board is installed.

When a Terminal Board with dual input terminals is installed, “SLOT INPUT A” and “SLOT INPUT B”

are displayed.

*2 “ COMPONENT” may be displayed as “RGB” depending on the setting of “Component/RGB-in select”.

(see page 47)

Notes:

• Only the adjusted signal is displayed (see page 15).

• Input switch can be used when this is set to “Off”.

• In two screen display mode, if anything other than “Off” is set, the value will be ﬁ xed as the value input

in the single screen display mode.

Button lock

Off

MENU&ENTER On

Off: All the buttons on main unit can be used.

MENU&ENTER: Locks

and

ENTER/

buttons on main unit.

On: Locks all the button on main unit.

Sets Button lock with the unit buttons in the following procedure.

Off: Press

four times→Press

INPUT

four times→Press four times→Press

ENTER/

MENU&ENTER: Press

ENTER/

four times→Press four times→Press

INPUT

four times→Press

ENTER/

On: Press four times→Press

ENTER/

four times→Press four times→Press

ENTER/

Remocon User level

Off

User1 User2 User3

Off: You can use all of the buttons on the remote control.

User1: You can only use

, , , , buttons on the remote control.

User2: You can only use

button on the remote control.

User3:

Locks all the buttons on remote control.

Off-timer function

Enable: Enables the “Off-timer function”.

Disable: Disables the “Off-timer function”.

Note: When “Disable” is set, the Off-timer is cancelled.

Initial Power Mode

Normal

Standby On

Sets the power mode of the unit for when the power recovers from failure or after plugging off and in again.

Normal: Power returns in as the same state as before the power interruption.

Standby

: Power returns in standby mode. (Power Indicator : red/orange)

On: Power returns in power On. (Power Indicator : green)

Note: When using multiple displays, “Standby” is preferred to be set in order to reduce a power load.

ID select

Sets panel ID number when panel is used in “Remote ID” or “Serial ID”.

Set value range: 0 - 100

(Standard value: 0)

Remote ID

The setting of this menu is valid only when using ID remote control.

Off: Disables ID remote control functions. You can use normal remote control operations.

On: Enable ID remote control functions.

Note: To use the ID remote control function, it is necessary to set each ID number of remote control and display unit.

About the setting method, please refer to “ID Remote Control Function” (see page 43) and “ID

select” (above-mentioned).

Serial ID

Sets the panel ID Control.

Off: Disables external control by the ID.

On: Enables the external control by the ID.

Display size

Adjusts the image display size on screen.

Off: Sets the normal image display size on screen.

On: Sets the image display size approximately 95 % of the normal image display.

Off On

Notes:

• This setting is valid only when the input signals are as follows;

NTSC, PAL, SECAM, M.NTSC, PAL60, PAL-M, PAL-N

525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i, 1125/50i, 1125/24sF, 1125/25p, 1125/24p,

1125/30p, 1125/60p, 1125/50p, 1250/50i (Component Video, RGB, DVI, SDI, HDMI)

• This setting is invalid when two screen display, digital zoom, Multi display or Portrait display is

selected.

• When “Display size” is set to “On”, “H-Pos” and “V-Pos” in “Pos. /Size” can be adjusted.

• Refer to each board’s operating instruction for DVI, SDI, HDMI’s corresponding signals.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic TH42PF20E Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic TH42PF20E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info